Commercial Turnbuckle, Hook and Eye
Commercial Turnbuckle, Hook and Eye, in 8 sizes, 6 mm to 24 mm, WLL 100 to 3,000 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Commercial Turnbuckle, Hook and Eye
- Size range: 6 mm to 24 mm
- Working load limit: 100 to 3,000 kg
- Size range
- 6 mm to 24 mm
- Working load limit
- 100 to 3,000 kg
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack.
Sizes and ratings
8 sizes, 6 mm to 24 mm. Working load limit 100 to 3,000 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Commercial Turnbuckle, Hook and Eye |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 24 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 100 to 3,000 kg |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | Size | WLL (kg) | Overall length (mm) | Body length (mm) | Weight (kg) |
|---|---|---|---|---|---|
| IH-LR-TB-COM-6MM | 6 mm | 100 | 215 | 100 | 0.16 |
| IH-LR-TB-COM-8MM | 8 mm | 200 | 280 | 125 | 0.24 |
| IH-LR-TB-COM-10MM | 10 mm | 300 | 325 | 150 | 0.36 |
| IH-LR-TB-COM-12MM | 12 mm | 500 | 430 | 200 | 0.64 |
| IH-LR-TB-COM-16MM | 16 mm | 1,000 | 540 | 250 | 1.44 |
| IH-LR-TB-COM-20MM | 20 mm | 1,500 | 670 | 300 | 2.25 |
| IH-LR-TB-COM-22MM | 22 mm | 2,200 | 740 | 330 | 3.53 |
| IH-LR-TB-COM-24MM | 24 mm | 3,000 | 830 | 350 | 4.34 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Overall length — Overall length. Body length — Length of the body between the threaded ends. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the commercial turnbuckle, hook and eye come in?▾
What is the working load limit?▾
Why do hook-end turnbuckles have a lower WLL?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Commercial Turnbuckle — Eye and Eye, Cast Steel
DIN 1478 Turnbuckle — Galvanized
DIN 1480 Turnbuckle
Die-Cast Zinc Turnbuckle
Galvanized Rigging Screw, Closed Body
Hamburger Lashing Turnbuckle
Turnbuckle — Italian Type
