Drop Forged Turnbuckle — US Type, 500–75,000 lbs WLL

Drop Forged Turnbuckle, in 36 sizes, 1/4″ × 4″ to 2″-3/4″ × 24″, WLL 500 to 75,000 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Drop Forged Turnbuckle
- Size range: 1/4″ × 4″ to 2″-3/4″ × 24″
- Working load limit: 500 to 75,000 lbs
- Size range
- 1/4″ × 4″ to 2″-3/4″ × 24″
- Working load limit
- 500 to 75,000 lbs
- Material
- Drop-forged steel
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Drop-forged steel.
Sizes and ratings
36 sizes, 1/4″ × 4″ to 2″-3/4″ × 24″. Working load limit 500 to 75,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Drop Forged Turnbuckle |
| Sizes | 36 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ × 4″ to 2″-3/4″ × 24″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 500 to 75,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Drop-forged steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
36 sizes- Indus part no.IH-LR-TB-US-025X400
- Size
- 1/4″ × 4″
- WLL, hook ends (lbs)
- 400
- WLL, eye / jaw ends (lbs)
- 500
- Weight (lbs)
- 0.3
- Indus part no.IH-LR-TB-US-031X400-050
- Size
- 5/16″ × 4″-1/2″
- WLL, hook ends (lbs)
- 700
- WLL, eye / jaw ends (lbs)
- 800
- Weight (lbs)
- 0.5
- Indus part no.IH-LR-TB-US-038X600
- Size
- 3/8″ × 6″
- WLL, hook ends (lbs)
- 1,000
- WLL, eye / jaw ends (lbs)
- 1,200
- Weight (lbs)
- 0.75
- Indus part no.IH-LR-TB-US-050X600
- Size
- 1/2″ × 6″
- WLL, hook ends (lbs)
- 1,500
- WLL, eye / jaw ends (lbs)
- 2,200
- Weight (lbs)
- 1.5
- Indus part no.IH-LR-TB-US-050X900
- Size
- 1/2″ × 9″
- WLL, hook ends (lbs)
- 1,500
- WLL, eye / jaw ends (lbs)
- 2,200
- Weight (lbs)
- 1.75
- Indus part no.IH-LR-TB-US-050X1200
- Size
- 1/2″ × 12″
- WLL, hook ends (lbs)
- 1,500
- WLL, eye / jaw ends (lbs)
- 2,200
- Weight (lbs)
- 2.18
- Indus part no.IH-LR-TB-US-062X600
- Size
- 5/8″ × 6″
- WLL, hook ends (lbs)
- 2,250
- WLL, eye / jaw ends (lbs)
- 3,500
- Weight (lbs)
- 2.63
- Indus part no.IH-LR-TB-US-062X900
- Size
- 5/8″ × 9″
- WLL, hook ends (lbs)
- 2,250
- WLL, eye / jaw ends (lbs)
- 3,500
- Weight (lbs)
- 3
Show all 36 sizesShow fewer sizes
- Indus part no.IH-LR-TB-US-062X1200
- Size
- 5/8″ × 12″
- WLL, hook ends (lbs)
- 2,250
- WLL, eye / jaw ends (lbs)
- 3,500
- Weight (lbs)
- 3.25
- Indus part no.IH-LR-TB-US-075X600
- Size
- 3/4″ × 6″
- WLL, hook ends (lbs)
- 3,000
- WLL, eye / jaw ends (lbs)
- 5,200
- Weight (lbs)
- 3.75
- Indus part no.IH-LR-TB-US-075X900
- Size
- 3/4″ × 9″
- WLL, hook ends (lbs)
- 3,000
- WLL, eye / jaw ends (lbs)
- 5,200
- Weight (lbs)
- 4.5
- Indus part no.IH-LR-TB-US-075X1200
- Size
- 3/4″ × 12″
- WLL, hook ends (lbs)
- 3,000
- WLL, eye / jaw ends (lbs)
- 5,200
- Weight (lbs)
- 5.75
- Indus part no.IH-LR-TB-US-075X1800
- Size
- 3/4″ × 18″
- WLL, hook ends (lbs)
- 3,000
- WLL, eye / jaw ends (lbs)
- 5,200
- Weight (lbs)
- 7
- Indus part no.IH-LR-TB-US-088X600
- Size
- 7/8″ × 6″
- WLL, hook ends (lbs)
- 4,000
- WLL, eye / jaw ends (lbs)
- 7,200
- Weight (lbs)
- 5.85
- Indus part no.IH-LR-TB-US-088X1200
- Size
- 7/8″ × 12″
- WLL, hook ends (lbs)
- 4,000
- WLL, eye / jaw ends (lbs)
- 7,200
- Weight (lbs)
- 8.38
- Indus part no.IH-LR-TB-US-088X1800
- Size
- 7/8″ × 18″
- WLL, hook ends (lbs)
- 4,000
- WLL, eye / jaw ends (lbs)
- 7,200
- Weight (lbs)
- 10.25
- Indus part no.IH-LR-TB-US-100X600
- Size
- 1″ × 6″
- WLL, hook ends (lbs)
- 5,000
- WLL, eye / jaw ends (lbs)
- 10,000
- Weight (lbs)
- 8.76
- Indus part no.IH-LR-TB-US-100X1200
- Size
- 1″ × 12″
- WLL, hook ends (lbs)
- 5,000
- WLL, eye / jaw ends (lbs)
- 10,000
- Weight (lbs)
- 11.25
- Indus part no.IH-LR-TB-US-100X1800
- Size
- 1″ × 18″
- WLL, hook ends (lbs)
- 5,000
- WLL, eye / jaw ends (lbs)
- 10,000
- Weight (lbs)
- 14
- Indus part no.IH-LR-TB-US-100X2400
- Size
- 1″ × 24″
- WLL, hook ends (lbs)
- 5,000
- WLL, eye / jaw ends (lbs)
- 10,000
- Weight (lbs)
- 17
- Indus part no.IH-LR-TB-US-100-025X600
- Size
- 1″-1/4″ × 6″
- WLL, hook ends (lbs)
- 6,500
- WLL, eye / jaw ends (lbs)
- 15,200
- Weight (lbs)
- 15.45
- Indus part no.IH-LR-TB-US-100-025X1200
- Size
- 1″-1/4″ × 12″
- WLL, hook ends (lbs)
- 6,500
- WLL, eye / jaw ends (lbs)
- 15,200
- Weight (lbs)
- 19
- Indus part no.IH-LR-TB-US-100-025X1800
- Size
- 1″-1/4″ × 18″
- WLL, hook ends (lbs)
- 6,500
- WLL, eye / jaw ends (lbs)
- 15,200
- Weight (lbs)
- 24.1
- Indus part no.IH-LR-TB-US-100-025X2400
- Size
- 1″-1/4″ × 24″
- WLL, hook ends (lbs)
- 6,500
- WLL, eye / jaw ends (lbs)
- 15,200
- Weight (lbs)
- 25
- Indus part no.IH-LR-TB-US-100-050X600
- Size
- 1″-1/2″ × 6″
- WLL, hook ends (lbs)
- 7,500
- WLL, eye / jaw ends (lbs)
- 21,400
- Weight (lbs)
- —
- Indus part no.IH-LR-TB-US-100-050X1200
- Size
- 1″-1/2″ × 12″
- WLL, hook ends (lbs)
- 7,500
- WLL, eye / jaw ends (lbs)
- 21,400
- Weight (lbs)
- 27
- Indus part no.IH-LR-TB-US-100-050X1800
- Size
- 1″-1/2″ × 18″
- WLL, hook ends (lbs)
- 7,500
- WLL, eye / jaw ends (lbs)
- 21,400
- Weight (lbs)
- 31.2
- Indus part no.IH-LR-TB-US-100-050X2400
- Size
- 1″-1/2″ × 24″
- WLL, hook ends (lbs)
- 7,500
- WLL, eye / jaw ends (lbs)
- 21,400
- Weight (lbs)
- 38.2
- Indus part no.IH-LR-TB-US-100-075X600
- Size
- 1″-3/4″ × 6″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 28,000
- Weight (lbs)
- —
- Indus part no.IH-LR-TB-US-100-075X1800
- Size
- 1″-3/4″ × 18″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 28,000
- Weight (lbs)
- 45.2
- Indus part no.IH-LR-TB-US-100-075X2400
- Size
- 1″-3/4″ × 24″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 28,000
- Weight (lbs)
- 58
- Indus part no.IH-LR-TB-US-200X600
- Size
- 2″ × 6″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 37,000
- Weight (lbs)
- —
- Indus part no.IH-LR-TB-US-200X2400
- Size
- 2″ × 24″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 37,000
- Weight (lbs)
- 90
- Indus part no.IH-LR-TB-US-200-050X600
- Size
- 2″-1/2″ × 6″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 60,000
- Weight (lbs)
- —
- Indus part no.IH-LR-TB-US-200-050X2400
- Size
- 2″-1/2″ × 24″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 60,000
- Weight (lbs)
- 180
- Indus part no.IH-LR-TB-US-200-075X2400
- Size
- 2″-3/4″ × 24″
- WLL, hook ends (lbs)
- —
- WLL, eye / jaw ends (lbs)
- 75,000
- Weight (lbs)
- 210
Size — Nominal size as the manufacturer states it. WLL, hook ends — Working load limit with hook end fittings, which rate lower than eyes or jaws. WLL, eye / jaw ends — Working load limit with eye, jaw or stub end fittings. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Drop Forged Turnbuckle — US Type and where is it used?▾
How do I read Drop Forged Turnbuckle — US Type part numbers such as IH-LR-TB-US-025X400?▾
Which sizes does the Drop Forged Turnbuckle — US Type come in?▾
How do I choose the right size of Drop Forged Turnbuckle — US Type?▾
What load rating does the Drop Forged Turnbuckle — US Type carry?▾
What material and finish does the Drop Forged Turnbuckle — US Type have?▾
What standard and certificate apply to the Drop Forged Turnbuckle — US Type?▾
What do I use with the Drop Forged Turnbuckle — US Type?▾
How should the Drop Forged Turnbuckle — US Type be fitted and inspected?▾
How does the Drop Forged Turnbuckle — US Type compare with the Stainless Steel Drop Forged Turnbuckle — US Type?▾
Can you export the Drop Forged Turnbuckle — US Type from Dubai?▾
Do you hold the Drop Forged Turnbuckle — US Type for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Turnbuckle types: hook, eye and jaw ends, open and closed bodies, and what each can carry
A turnbuckle is only as strong as its weakest end, and that is usually the hook: on our US drop-forged range a 1/2″ hook end is rated 1,500 lb against 2,200 lb for eye or jaw ends. Here is how end fittings and body types change the rating, which standards cover what, and how to keep a turnbuckle from unwinding.
6 min read
Lifting & rigging
Turnbuckles for guy wires and cable bracing: building the whole assembly
Guyed masts, temporary towers, steel bracing, shade structures and facade cables all end the same way: a wire rope, a thimble, clips or a ferrule, and a turnbuckle to set the tension. How to put the assembly together so every part matches, set the tension, lock the turnbuckle and keep it there through Gulf heat and wind.
4 min read
Lifting & rigging
How to choose and tension a turnbuckle: end fittings, ratings, locking and inspection
A turnbuckle looks simple — two threads and a body — but the end fittings change its rating by half, an unlocked one can spin itself loose, and it is built for straight pulls only. How to choose the end fittings, body and size, read the rating, tension it properly, lock it, and know when to take it out of service.
4 min read








