Rigging Screw, Jaw and Jaw — M12–M39

Rigging Screw, Jaw and Jaw, in 8 sizes, M12 to M39. Load rating on request. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Rigging Screw, Jaw and Jaw
- Size range: M12 to M39
- Size range
- M12 to M39
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack.
Sizes
8 sizes, M12 to M39. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Choosing a size
Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Rigging Screw, Jaw and Jaw |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M12 to M39 |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-LR-TB-RSJJ-M12
- Size
- M12
- Body length (mm)
- 229
- Weight (kg)
- 0.67
- Indus part no.IH-LR-TB-RSJJ-M16
- Size
- M16
- Body length (mm)
- 229
- Weight (kg)
- 1.2
- Indus part no.IH-LR-TB-RSJJ-M20
- Size
- M20
- Body length (mm)
- 229
- Weight (kg)
- 2.15
- Indus part no.IH-LR-TB-RSJJ-M22
- Size
- M22
- Body length (mm)
- 305
- Weight (kg)
- 3.25
- Indus part no.IH-LR-TB-RSJJ-M24
- Size
- M24
- Body length (mm)
- 356
- Weight (kg)
- 5.2
- Indus part no.IH-LR-TB-RSJJ-M27
- Size
- M27
- Body length (mm)
- 368
- Weight (kg)
- 6.75
- Indus part no.IH-LR-TB-RSJJ-M32
- Size
- M32
- Body length (mm)
- 381
- Weight (kg)
- 9.35
- Indus part no.IH-LR-TB-RSJJ-M39
- Size
- M39
- Body length (mm)
- 406
- Weight (kg)
- 11.2
Size — Nominal size as the manufacturer states it. Body length — Length of the body between the threaded ends. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Rigging Screw, Jaw and Jaw and where is it used?▾
How do I read Rigging Screw, Jaw and Jaw part numbers such as IH-LR-TB-RSJJ-M12?▾
What size range does the Rigging Screw, Jaw and Jaw cover?▾
How should I pick the size of Rigging Screw, Jaw and Jaw for my job?▾
What is the rated capacity of the Rigging Screw, Jaw and Jaw?▾
What material and finish does the Rigging Screw, Jaw and Jaw have?▾
Does the Rigging Screw, Jaw and Jaw come with a test certificate?▾
What do I use with the Rigging Screw, Jaw and Jaw?▾
How do I install and check the Rigging Screw, Jaw and Jaw?▾
How does the Rigging Screw, Jaw and Jaw compare with the Stainless Steel Rigging Screw, Jaw and Jaw?▾
Do you ship the Rigging Screw, Jaw and Jaw outside the UAE?▾
Do you hold the Rigging Screw, Jaw and Jaw for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








