Stainless Steel Drop Forged Turnbuckle — US Type, 500–75,000 lbs WLL

Stainless Steel Drop Forged Turnbuckle (US federal specification), in 97 sizes, WLL 500 to 75,000 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Drop Forged Turnbuckle
- Pattern / standard: US federal specification
- Working load limit: 500 to 75,000 lbs
- Working load limit
- 500 to 75,000 lbs
- Material
- Stainless steel 304 or 316 turnbuckle
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Built to the US federal specification. Stainless steel 304 or 316 turnbuckle.
Sizes and ratings
97 sizes. Working load limit 500 to 75,000 lbs. Available as: eye and eye, jaw and eye, jaw and jaw, body only. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
Choose on WLL with the end fittings you will use — hook ends rate lower than eyes or jaws — and on the take-up length you need. Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Drop Forged Turnbuckle |
| Pattern / standard | US federal specification |
| Sizes | 97 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 500 to 75,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 turnbuckle |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
97 sizes- Indus part no.IH-LR-TB-SSDFTUS-025X400-EE
- Size
- 1/4″ × 4″
- Type
- Eye and eye
- WLL (lbs)
- 500
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 303.3
- K (mm)
- 201.7
- L (mm)
- —
- M (mm)
- 314.5
- N (mm)
- 8.38
- R (mm)
- 20.57
- S (mm)
- 8.636
- X (mm)
- 44.7
- Weight (lbs)
- 0.29
- Indus part no.IH-LR-TB-SSDFTUS-031X450-EE
- Size
- 5/16″ × 4-1/2″
- Type
- Eye and eye
- WLL (lbs)
- 800
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 353.6
- K (mm)
- 239.3
- L (mm)
- —
- M (mm)
- 367.8
- N (mm)
- 9.98
- R (mm)
- 24.13
- S (mm)
- 11.18
- X (mm)
- 55.88
- Weight (lbs)
- 0.48
- Indus part no.IH-LR-TB-SSDFTUS-038X600-EE
- Size
- 3/8″ × 6″
- Type
- Eye and eye
- WLL (lbs)
- 1,200
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 446
- K (mm)
- 293.6
- L (mm)
- —
- M (mm)
- 463.3
- N (mm)
- 12.24
- R (mm)
- 28.7
- S (mm)
- 13.46
- X (mm)
- 62.99
- Weight (lbs)
- 0.75
- Indus part no.IH-LR-TB-SSDFTUS-050X600-EE
- Size
- 1/2″ × 6″
- Type
- Eye and eye
- WLL (lbs)
- 2,200
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 506.5
- K (mm)
- 354.1
- L (mm)
- —
- M (mm)
- 528.8
- N (mm)
- 14.82
- R (mm)
- 35.81
- S (mm)
- 18.03
- X (mm)
- 90.42
- Weight (lbs)
- 1.72
- Indus part no.IH-LR-TB-SSDFTUS-050X1200-EE
- Size
- 1/2″ × 12″
- Type
- Eye and eye
- WLL (lbs)
- 2,200
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 818.6
- K (mm)
- 513.8
- L (mm)
- —
- M (mm)
- 841
- N (mm)
- 21.11
- R (mm)
- 35.81
- S (mm)
- 18.03
- X (mm)
- 89.92
- Weight (lbs)
- 2.63
- Indus part no.IH-LR-TB-SSDFTUS-062X600-EE
- Size
- 5/8″ × 6″
- Type
- Eye and eye
- WLL (lbs)
- 3,500
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 551.7
- K (mm)
- 399.3
- L (mm)
- —
- M (mm)
- 577.1
- N (mm)
- 16.72
- R (mm)
- 45.72
- S (mm)
- 22.35
- X (mm)
- 110.5
- Weight (lbs)
- 2.75
- Indus part no.IH-LR-TB-SSDFTUS-062X1200-EE
- Size
- 5/8″ × 12″
- Type
- Eye and eye
- WLL (lbs)
- 3,500
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 865.1
- K (mm)
- 560.3
- L (mm)
- —
- M (mm)
- 890.5
- N (mm)
- 23.06
- R (mm)
- 45.72
- S (mm)
- 22.35
- X (mm)
- 110.2
- Weight (lbs)
- 4.12
- Indus part no.IH-LR-TB-SSDFTUS-075X600-EE
- Size
- 3/4″ × 6″
- Type
- Eye and eye
- WLL (lbs)
- 5,200
- B (mm)
- —
- C (mm)
- —
- E (mm)
- —
- G (mm)
- —
- J (mm)
- 590.3
- K (mm)
- 437.9
- L (mm)
- —
- M (mm)
- 622.3
- N (mm)
- 18.5
- R (mm)
- 53.09
- S (mm)
- 25.4
- X (mm)
- 130
- Weight (lbs)
- 4.22
Show all 97 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. N — Dimension N on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. X — Dimension X on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Drop Forged Turnbuckle — US Type used for?▾
How do I read Stainless Steel Drop Forged Turnbuckle — US Type part numbers such as IH-LR-TB-SSDFTUS-025X400-EE?▾
What size range does the Stainless Steel Drop Forged Turnbuckle — US Type cover?▾
How should I pick the size of Stainless Steel Drop Forged Turnbuckle — US Type for my job?▾
What load rating does the Stainless Steel Drop Forged Turnbuckle — US Type carry?▾
What is the Stainless Steel Drop Forged Turnbuckle — US Type made from and how is it finished?▾
Does the Stainless Steel Drop Forged Turnbuckle — US Type come with a test certificate?▾
What do I use with the Stainless Steel Drop Forged Turnbuckle — US Type?▾
How should the Stainless Steel Drop Forged Turnbuckle — US Type be fitted and inspected?▾
How does the Stainless Steel Drop Forged Turnbuckle — US Type compare with the Drop Forged Turnbuckle — US Type?▾
Can you export the Stainless Steel Drop Forged Turnbuckle — US Type from Dubai?▾
Is the Stainless Steel Drop Forged Turnbuckle — US Type available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








