JIS Frame Turnbuckle, Eye and Hook — 6–24 mm

JIS Frame Turnbuckle, Eye and Hook (JIS frame type), in 8 sizes, 6 mm to 24 mm. Load rating on request. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: JIS Frame Turnbuckle, Eye and Hook
- Pattern / standard: JIS frame type
- Size range: 6 mm to 24 mm
- Size range
- 6 mm to 24 mm
- Material
- Steel
Product description
Turnbuckles and rigging screws tension guy lines, stays and tie-downs and take up slack. Made to JIS frame type. Steel.
Sizes
8 sizes, 6 mm to 24 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Choosing a size
Lock the body once tensioned so it cannot back off.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | JIS Frame Turnbuckle, Eye and Hook |
| Pattern / standard | JIS frame type |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 24 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-LR-TB-JIS-6MM
- Size
- 6 mm
- Body length (mm)
- 100
- Weight (kg)
- 0.116
- Indus part no.IH-LR-TB-JIS-8MM
- Size
- 8 mm
- Body length (mm)
- 125
- Weight (kg)
- 0.22
- Indus part no.IH-LR-TB-JIS-10MM
- Size
- 10 mm
- Body length (mm)
- 150
- Weight (kg)
- 0.295
- Indus part no.IH-LR-TB-JIS-12MM
- Size
- 12 mm
- Body length (mm)
- 200
- Weight (kg)
- 0.6
- Indus part no.IH-LR-TB-JIS-16MM
- Size
- 16 mm
- Body length (mm)
- 250
- Weight (kg)
- 1.07
- Indus part no.IH-LR-TB-JIS-20MM
- Size
- 20 mm
- Body length (mm)
- 300
- Weight (kg)
- 1.79
- Indus part no.IH-LR-TB-JIS-22MM
- Size
- 22 mm
- Body length (mm)
- 330
- Weight (kg)
- 2.55
- Indus part no.IH-LR-TB-JIS-24MM
- Size
- 24 mm
- Body length (mm)
- 350
- Weight (kg)
- 3.8
Size — Nominal size as the manufacturer states it. Body length — Length of the body between the threaded ends. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the JIS Frame Turnbuckle, Eye and Hook and where is it used?▾
How do I read JIS Frame Turnbuckle, Eye and Hook part numbers such as IH-LR-TB-JIS-6MM?▾
Which sizes does the JIS Frame Turnbuckle, Eye and Hook come in?▾
How should I pick the size of JIS Frame Turnbuckle, Eye and Hook for my job?▾
What load rating does the JIS Frame Turnbuckle, Eye and Hook carry?▾
What is the JIS Frame Turnbuckle, Eye and Hook made from and how is it finished?▾
Does the JIS Frame Turnbuckle, Eye and Hook come with a test certificate?▾
Which parts connect to the JIS Frame Turnbuckle, Eye and Hook?▾
How should the JIS Frame Turnbuckle, Eye and Hook be fitted and inspected?▾
How does the JIS Frame Turnbuckle, Eye and Hook compare with the Commercial Turnbuckle, Hook and Eye?▾
Can you export the JIS Frame Turnbuckle, Eye and Hook from Dubai?▾
Is the JIS Frame Turnbuckle, Eye and Hook available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
How to choose and tension a turnbuckle: end fittings, ratings, locking and inspection
A turnbuckle looks simple — two threads and a body — but the end fittings change its rating by half, an unlocked one can spin itself loose, and it is built for straight pulls only. How to choose the end fittings, body and size, read the rating, tension it properly, lock it, and know when to take it out of service.
4 min read
Lifting & rigging
DIN 1480 vs DIN 1478 turnbuckles: open frame or closed body?
DIN 1480 and DIN 1478 are the two German standards behind most metric turnbuckles in the Gulf. One is a forged open frame you can see the threads through; the other a closed tube that hides them. What each standard covers, how their ratings compare size for size, how the end fittings change things, and which to choose for bracing, guying, lashing and fencing.
3 min read
Lifting & rigging
Turnbuckle types: hook, eye and jaw ends, open and closed bodies, and what each can carry
A turnbuckle is only as strong as its weakest end, and that is usually the hook: on our US drop-forged range a 1/2″ hook end is rated 1,500 lb against 2,200 lb for eye or jaw ends. Here is how end fittings and body types change the rating, which standards cover what, and how to keep a turnbuckle from unwinding.
6 min read








