Skip to content

Lifting Hooks

45 SKUs

Showing 1–45 of 45 SKUs

Yellow-chromate weld-on hook, beside its dimension drawing

Weld-On Hook — 2–10 t WLL

2 to 10 t5/16″ to 10 t
Inquire
Stainless steel eye grab hook, 316 marked

Stainless Steel Eye Grab Hook — 1,250–3,600 lbs WLL

Stainless steel 304 or 3161/4″ to 1/2″
Inquire
Eye Twist Hook (Reverse Eye Hook) — dimension drawing

Eye Twist Hook (Reverse Eye Hook) — 8 t WLL

Powder coated / hot dipped galvanized / zinc plated / self colour8 t
Inquire
Red eye slip hook with latch, H-324 / A-324 pattern, beside its drawing

Eye Slip Hook with Latch — H-324 / A-324 Pattern, 1/4–3/4″

alloy 2,750 to 19,250 lbs; carbon 1,950 to 12,500 lbs1/4″ to 3/4″
Inquire
Red eye slip hook, H-324 / A-324 pattern, beside its dimension drawing

Eye Slip Hook — H-324 / A-324 Pattern, 1/4–3/4″

alloy 2,750 to 19,250 lbs; carbon 1,950 to 12,500 lbs1/4″ to 3/4″
Inquire
Yellow-chromate eye grab hook, H-323 / A-323 pattern, beside its drawing

Eye Grab Hook — H-323 / A-323 Pattern, 1/4–3/4″

1/4″ to 3/4″alloy 3,500 to 24,700 lbs; carbon 2,600 to 20,200 lbs
Inquire
Eye Bend Hook, Forged Alloy — Type A — dimension drawing

Eye Bend Hook, Forged Alloy — Type A, 5/16–1/2″

Alloy steelPowder coated / hot dipped galvanized / zinc plated / self colour
Inquire
Yellow-chromate clevis slip hook with latch, beside its dimension drawing

Clevis Slip Hook with Latch — Carbon and Alloy, 1/4–1″

1/4″ to 1″alloy 2,750 to 26,500 lbs; carbon 1,950 to 17,600 lbs
Inquire
Yellow-chromate clevis slip hook, H-331 / A-331 pattern, beside its drawing

Clevis Slip Hook — H-331 / A-331 Pattern, 1/4–3/4″

1/4″ to 3/4″alloy 2,750 to 19,250 lbs; carbon 1,950 to 12,500 lbs
Inquire
Yellow-chromate clevis grab hook, H-330 / A-330 pattern, beside its drawing

Clevis Grab Hook — H-330 / A-330 Pattern, 1/4–3/4″

alloy 3,500 to 24,700 lbs; carbon 2,600 to 20,200 lbs1/4″ to 3/4″
Inquire
Category image · Lifting & Rigging
Eye Sling Hook with Triangle Ring — dimension drawing

Eye Sling Hook with Triangle Ring

Carbon steelHot dipped galvanized / zinc plated
Inquire
Red 320-pattern eye hoist hook with safety latch, beside its drawing

Eye Hoist Hook with Latch — 320 Pattern

1/4 t to 32 mmalloy 0.5 to 22 t; carbon 0.25 to 15 t; grade 1.12 to 31.5 t
Inquire
Red 320-pattern eye hoist hook, beside its dimension drawing

Eye Hoist Hook — 320 Pattern

alloy 0.5 to 22 t; carbon 0.25 to 15 t1/4 t to 22 t
Inquire
Clevis Grab Hook with Latch — Grade 43 and Grade 70 — dimension drawing, grade 43

Clevis Grab Hook with Latch — Grade 43 and Grade 70

Carbon steelPowder coated / hot dipped galvanized / zinc plated / self colour
Inquire
Clevis Grab Hook, Grade 70 — AS/NZS 4344 — dimension drawing, no wing

Clevis Grab Hook, Grade 70 — AS/NZS 4344

Alloy steelSelf colour, zinc plated
Inquire
Red 322-pattern swivel hoist hook with safety latch, beside its drawing

Swivel Hoist Hook with Latch — 322 Pattern

3/4 t to 22 talloy 1 to 22 t; carbon 0.75 to 15 t
Inquire
Red 322-pattern swivel hoist hook, beside its dimension drawing

Swivel Hoist Hook — 322 Pattern

alloy 1 to 22 t; carbon 0.75 to 15 t3/4 t to 22 t
Inquire
Stainless Steel Eye Slip Hook with Latch — dimension drawing

Stainless Steel Eye Slip Hook with Latch

Type 304 or type 316 stainless steel17.8 to 53.4 kN
Inquire
Red 319-pattern shank hoist hook with safety latch, beside its drawing

Shank Hoist Hook with Latch — 319 Pattern

alloy 1 to 15 t; carbon 0.75 to 10 t3/4 t to 15 t
Inquire
Red 319-pattern shank hoist hook, beside its dimension drawing

Shank Hoist Hook — 319 Pattern

alloy 1 to 15 t; carbon 0.75 to 10 t3/4 t to 15 t
Inquire

Questions we get asked

About this range

01What is the difference between WLL, SWL and breaking load?
WLL — working load limit — is the most the manufacturer rates a part to carry in service. SWL, safe working load, is the older term and is sometimes set lower for a particular installation. The minimum breaking load is what the part withstood in test, several times its WLL, and it is never a working figure.
02Do the parts come with test certificates?
Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
03What do the 319, 320, 322, 323, 324, 330 and 331 hook numbers mean?
They are US pattern numbers that identify the hook's form. 319 is a shank hoist hook, 320 an eye hoist hook and 322 a swivel hoist hook; 323 is an eye grab hook, 324 an eye slip hook, 330 a clevis grab hook and 331 a clevis slip hook. An H or A prefix, and the -C or -A suffix in the Indus part number, separates the carbon and alloy versions of the same frame, which carry different ratings.
04Are the Grade 70 AS/NZS 4344 hooks rated for lifting?
No. AS/NZS 4344 covers load restraint on vehicles, and hooks made to it are rated by lashing capacity for tie-down with Grade 70 transport chain. Use them on load binders and lashing chains, not in an overhead lift. For lifting, choose a hook with a published WLL for lifting, in the same grade as the chain it goes on, such as a Grade 80 or alloy-steel hook.
05Eye, clevis or shank hook — how do I choose the attachment?
Choose by what the hook connects to. An eye hook hangs from a master link, shackle or sling eye through its forged eye. A clevis hook pins directly onto a chain link with its clevis pin, which keeps the assembly short, and must be the same grade and size as the chain. A shank hook is fitted into a hoist or block body and retained by a nut, and a swivel hook lets the load turn freely. Each type carries its own rating in the size table.
06Can I shorten a chain sling leg with a grab hook?
Yes, with a grab hook made and rated for it, of the same grade as the chain. The grab hook holds a link edgeways in its narrow throat; a slip hook used this way lets the chain run and must not be used to shorten a leg. Some manufacturers apply a lower rating to a leg shortened with a grab hook that has no supporting cradle — check the maker's instructions for the hook you use.