Shank Hoist Hook — 319 Pattern
Shank Hoist Hook, 319 pattern, in 11 sizes, 3/4 t to 15 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Shank Hoist Hook
- Pattern / standard: 319
- Size range: 3/4 t to 15 t
- Working load limit: alloy 1 to 15 t; carbon 0.75 to 10 t
- Size range
- 3/4 t to 15 t
- Working load limit
- alloy 1 to 15 t; carbon 0.75 to 10 t
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. This range follows the 319 pattern, sized to interchange in an existing rigging plan.
Sizes and ratings
11 sizes, 3/4 t to 15 t. Working load limit alloy 1 to 15 t; carbon 0.75 to 10 t. Carbon- and alloy-steel versions share a frame but not a rating, so each is its own row in the table. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Proof load is 2 times the working load limit.
- Minimum ultimate load is 5 times the working load limit (a 5:1 design factor).
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Shank Hoist Hook |
| Pattern / standard | 319 |
| Sizes | 11 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/4 t to 15 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | alloy 1 to 15 t; carbon 0.75 to 10 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
16 sizesReplaces the Crosby 319 series. Quote the Indus part number, or send us the Crosby number and we will cross it.
| Indus part no. | Size | Grade | WLL (t) | A (mm) | B (mm) | E (mm) | R (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-HK-319-0T75-C | 3/4 t | Carbon steel | 0.75 | 15 | 50.8 | 23.9 | 57.9 | 0.5 |
| IH-LR-HK-319-1T-A | 1 t | Alloy steel | 1 | 15 | 50.8 | 23.9 | 57.9 | 0.5 |
| IH-LR-HK-319-1T-C | 1 t | Carbon steel | 1 | 16.8 | 57.1 | 26.2 | 64.3 | 0.75 |
| IH-LR-HK-319-1T5-A | 1-1/2 t | Alloy steel | 1.5 | 16.8 | 57.1 | 26.2 | 64.3 | 0.75 |
| IH-LR-HK-319-1T5-C | 1-1/2 t | Carbon steel | 1.5 | 18.3 | 63.5 | 26.9 | 68.3 | 1 |
| IH-LR-HK-319-2T-A | 2 t | Alloy steel | 2 | 18.3 | 63.5 | 26.9 | 68.3 | 1 |
| IH-LR-HK-319-2T-C | 2 t | Carbon steel | 2 | 22.4 | 69.8 | 31 | 77.7 | 1.85 |
| IH-LR-HK-319-3T-A | 3 t | Alloy steel | 3 | 22.4 | 69.8 | 31 | 77.7 | 1.85 |
| IH-LR-HK-319-3T-C | 3 t | Carbon steel | 3 | 29.5 | 82.5 | 38.1 | 96 | 3.85 |
| IH-LR-HK-319-5T-A | 5 t | Alloy steel | 5 | 29.5 | 82.5 | 38.1 | 96 | 3.85 |
| IH-LR-HK-319-5T-C | 5 t | Carbon steel | 5 | 35.8 | 95.2 | 47.8 | 120.6 | 7.25 |
| IH-LR-HK-319-7T-A | 7 t | Alloy steel | 7 | 35.8 | 95.2 | 47.8 | 120.6 | 7.25 |
| IH-LR-HK-319-7T5-C | 7-1/2 t | Carbon steel | 7.5 | 42.9 | 107.9 | 57.1 | 149.4 | 13 |
| IH-LR-HK-319-11T-A | 11 t | Alloy steel | 11 | 42.9 | 107.9 | 57.1 | 149.4 | 13 |
| IH-LR-HK-319-10T-C | 10 t | Carbon steel | 10 | 44.4 | 114.3 | 64 | 162.8 | 19.4 |
| IH-LR-HK-319-15T-A | 15 t | Alloy steel | 15 | 44.4 | 114.3 | 64 | 162.8 | 19.4 |
Size — Nominal size as the manufacturer states it. Grade — Material grade of this row — carbon and alloy versions share a frame but not a rating. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
Indus Hydraulics is not affiliated with Crosby. Crosby part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
What sizes does the shank hoist hook come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchtülle
- fr
- douille cannelée
- es
- espiga portamanguera
- it
- portagomma
Engineers viewing this also looked at
Shank Hoist Hook with Latch — 319 Pattern
Eye Hoist Hook — 320 Pattern
Eye Hoist Hook with Latch — 320 Pattern
Swivel Hoist Hook — 322 Pattern
Swivel Hoist Hook with Latch — 322 Pattern
Eye Grab Hook — H-323 / A-323 Pattern
Eye Slip Hook — H-324 / A-324 Pattern
