Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern, 0.5–3 t WLL

Stainless Steel Eye Hoist Hook with Latch (S-320), in 6 sizes, 0.5 t to 3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Eye Hoist Hook with Latch
- Pattern / standard: S-320
- Size range: 0.5 t to 3 t
- Working load limit: 0.5 to 3 t
- Size range
- 0.5 t to 3 t
- Working load limit
- 0.5 to 3 t
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. This range follows the S-320 pattern, sized to interchange in an existing rigging plan. Type 304 or type 316 stainless steel, polished.
Sizes and ratings
6 sizes, 0.5 t to 3 t. Working load limit 0.5 to 3 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Casting / forging.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Eye Hoist Hook with Latch |
| Pattern / standard | S-320 |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.5 t to 3 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.5 to 3 t |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizesReplaces the Crosby S-320 series. Quote the Indus part number, or send us the Crosby number and we will cross it.
- Indus part no.IH-LR-HK-SSEHHLS32-0P5T
- Size
- 0.5 t
- WLL (t)
- 0.5
- A (mm)
- 16.5
- B (mm)
- 92.7
- C (mm)
- 15.3
- D (mm)
- 8
- Weight (kg)
- 0.159
- Indus part no.IH-LR-HK-SSEHHLS32-0P75T
- Size
- 0.75 t
- WLL (t)
- 0.75
- A (mm)
- 18.3
- B (mm)
- 109.5
- C (mm)
- 18.3
- D (mm)
- 10
- Weight (kg)
- 0.253
- Indus part no.IH-LR-HK-SSEHHLS32-1T
- Size
- 1 t
- WLL (t)
- 1
- A (mm)
- 22.6
- B (mm)
- 118
- C (mm)
- 20.7
- D (mm)
- 11
- Weight (kg)
- 0.34
- Indus part no.IH-LR-HK-SSEHHLS32-1P5T
- Size
- 1.5 t
- WLL (t)
- 1.5
- A (mm)
- 28
- B (mm)
- 138.3
- C (mm)
- 24.3
- D (mm)
- 12
- Weight (kg)
- 0.476
- Indus part no.IH-LR-HK-SSEHHLS32-2T
- Size
- 2 t
- WLL (t)
- 2
- A (mm)
- 32.4
- B (mm)
- 165
- C (mm)
- 25.6
- D (mm)
- 15.5
- Weight (kg)
- 0.848
- Indus part no.IH-LR-HK-SSEHHLS32-3T
- Size
- 3 t
- WLL (t)
- 3
- A (mm)
- 38.2
- B (mm)
- 199
- C (mm)
- 31.5
- D (mm)
- 18
- Weight (kg)
- 0.156
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
Indus Hydraulics is not affiliated with Crosby. Crosby part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
What is the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern and what is it used for?▾
How are the Indus part numbers for the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern structured?▾
What sizes does the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern come in?▾
How do I choose the right size of Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern?▾
What is the working load limit of the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern?▾
What is the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern made from?▾
Does the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern come with a test certificate?▾
What should the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern be used with?▾
How should the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern be inspected and used safely?▾
Where is the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern typically used?▾
How does the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern differ from the Stainless Steel Eye Slip Hook with Latch?▾
Do you stock the Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lifting hook types: eye, clevis and swivel hooks, sling vs grab hooks, and latches
Hooks are chosen on two things: how they attach (eye, clevis, shank or swivel) and what they do (a sling or slip hook holds a load in its bowl; a grab hook grips a chain link). Use a grab hook to shorten a chain and the sling loses 20% unless the hook is a cradle type. Here is how the types differ, and when a hook comes out of service.
6 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read
Lifting & rigging
Stainless steel lifting chain: Grade 60 ratings, where it is worth it, and its limits
Stainless steel chain lifts where galvanised alloy chain would rust or contaminate: food plants, water treatment, marine and offshore. It carries less than Grade 80 at the same size, and chlorides in warm air can crack it. Ratings from our Grade 60 table, where stainless is worth it, which stainless chain to avoid for lifting, and how to look after it.
3 min read








