Skip to content
+971 52 2477942
Indus Hydraulics
Lane DXB → MY

Export from Dubai

MY

Hydraulic & industrial hose supplier in Malaysia

Indus Hydraulics ships hydraulic hose, fittings, valves and oilfield equipment from Jebel Ali to Port Klang in typically 14–18 days, to Pasir Gudang for the Johor belt, or by air into Kuala Lumpur in 2–4. East Malaysia is a separate transhipped leg to Bintulu, Miri or Labuan at 22–30 days. SIRIM certification is arranged at origin only for lines inside a regulated category, and much industrial hose sits outside it. The delivery town and the part list settle both questions at quotation.

Typical transit
Typically 14–18 days by sea to Port Klang · 22–30 days transhipped to Bintulu, Miri or Labuan · 2–4 days by air into Kuala Lumpur
Freight
Sea freight from Jebel Ali to Port Klang for the peninsula · Pasir Gudang for the Johor industrial belt · Bintulu, Miri or Labuan for Borneo, on a separate leg · Air freight into Kuala Lumpur where the schedule is tighter
Incoterms 2020
CIF Port Klang · DAP to the buyer’s site · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
SIRIM certification where the product falls inside a regulated category · Certificate of Origin, Dubai Chamber attested · Customs declaration raised by the importer
Request an export quote WhatsApp usEmail sales@indushydraulics.me
Fig. 01 · Export lane DXB → MYMercator · WGS 84
INDONESIAPORT KLANGKUALA LUMPURSHAH ALAMPASIR GUDANGPRAIKUANTANMIRIBINTULUKOTA KINABALU100°E105°E110°E115°E0°5°N10°NN400 KMSEA · MALACCA · 6,170 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea · malacca corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, via Malacca
Port of entry
Port Klang
Transit
14–18 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Malaysia prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Malaysia

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp
01

Hoses & Fittings supplier in Malaysia

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges
A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front
02

Industrial Hoses supplier in Malaysia

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges
A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block
03

Lifting & Rigging supplier in Malaysia

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges
A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve
06

Oilfield Valves supplier in Malaysia

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges
A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front
07

Flow Iron & Wellhead supplier in Malaysia

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges
A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body
08

Valves & Manifolds supplier in Malaysia

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front
09

Blowout Preventers (BOP) supplier in Malaysia

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box
10

Instrumentation & Controls supplier in Malaysia

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges
A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid
11

Well Testing Equipment supplier in Malaysia

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges
A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side
12

Fracturing Equipment supplier in Malaysia

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges
A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets
20

Hydraulic Tools & Bolting supplier in Malaysia

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Export quote · MY

Send the part list for Malaysia

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Malaysia

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Malaysia are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL14–18 days
Jebel Ali to Port Klang, mainlineDefault for most orders
Air freight2–4 days
DXB to KULWhen the line is down
Sea, to Borneo22–30 days
Transhipped for Bintulu, Miri or LabuanEast Malaysia

Sequence

How an order to Malaysia works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Where the line falls inside a SIRIM-regulated category the certification is arranged before the container is loaded; where it does not, we say so rather than charging for paperwork nobody needs.
  4. 04Goods sail from Jebel Ali to Port Klang, or transhipped onward for Borneo, with the paperwork and tracking together.

Industries

Who we supply in Malaysia

A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset
oil · gas

Oil & Gas in Malaysia

Offshore Sarawak and Sabah fields supported from Miri, Bintulu and Labuan; the Kerteh and Kemaman oil and gas base on the Terengganu coast; and the Pengerang refining and petrochemical complex in southern Johor — wellhead, valves, flow iron and drilling hose.

Industry page
A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon
marine

Marine & Offshore in Malaysia

Deck machinery, cranes and vessel hydraulics for the yards at Pasir Gudang, Lumut and Labuan, and for the offshore support fleet that works the Peninsular and Borneo fields.

Industry page
An excavator’s boom cylinders and hydraulic hoses on a construction site, a hazy city skyline behind
construction

Construction in Malaysia

Excavator, crane, piling and batching-plant hydraulics for the East Coast Rail Link, the Pan Borneo Highway in Sarawak and Sabah, and rail and road work across the Klang Valley.

Industry page
Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath
power

Power & Energy in Malaysia

Actuator, governor and gate hydraulics for gas turbine plant on the peninsula and for the large Sarawak hydro schemes such as Bakun and Murum.

Industry page
A glowing steel strip passing through a hot rolling mill stand with its hydraulic cylinders and tubing
steel

Steel & Metals in Malaysia

High-force cylinders and servo valves for rolling and forming lines in the Klang Valley and Johor, and for the east-coast steel mills around Kemaman and Kuantan.

Industry page
Close-up of a mining shovel’s hydraulic boom cylinders and hoses as it loads a haul truck in an open-pit mine
mining

Mining in Malaysia

Limestone quarries and cement plant in Perak’s Kinta Valley around Ipoh, bauxite in Pahang near Kuantan, and palm-oil mills whose presses and handling plant need hose and seal compounds chosen for vegetable oil, not mineral oil.

Industry page

Brands stocked for Malaysia

Delivery coverage

Cities and sites we deliver to in Malaysia

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

16 locations listed

  • Port Klang

    Selangor

  • Kuala Lumpur

    Federal Territory

  • Shah Alam

    Selangor

  • Pasir Gudang

    Johor

  • Johor Bahru

    Johor

  • Prai

    Penang

  • Ipoh

    Perak

  • Kuantan

    Pahang

  • Kerteh

    Terengganu

  • Melaka

    Melaka

  • Seremban

    Negeri Sembilan

  • Miri

    Sarawak

  • Bintulu

    Sarawak

  • Labuan

    Federal Territory

  • Kota Kinabalu

    Sabah

  • Lumut

    Perak

Questions we get asked

Supplying Malaysia, in detail

01

What is SIRIM and do our hydraulic parts need it?

SIRIM is the certification body for products inside Malaysia’s regulated categories, and a great deal of industrial hose, fittings and adapters sits outside that list. Send the part list at quotation and we will tell you which lines need a SIRIM QAS International certificate of approval and which do not, rather than certifying everything to be safe. Where a line is in scope, the certification is arranged at origin before the container is loaded.

02

Should our container land at Port Klang or Pasir Gudang?

Port Klang for the Klang Valley, Shah Alam and the west coast; Pasir Gudang if your plant sits in the Johor industrial belt around Johor Bahru, because the road leg from Klang is most of a day. Both take the mainline sailing from Jebel Ali, with Port Klang typically 14–18 days from dispatch. Name the delivery town at quotation and we will price the port that makes sense for it.

03

Can you deliver to Bintulu, Miri, Labuan or Kota Kinabalu?

Yes. East Malaysia is reached by transhipment rather than the mainline sailing, typically 22–30 days from Jebel Ali to Bintulu, Miri or Labuan, and Kota Kinabalu is quoted on the same basis. That is a week or more longer than the peninsula, so it is quoted as its own leg. For offshore campaigns supported out of Miri or Labuan, give us the mobilisation date and we will plan the sailing back from it.

04

Why does cargo for Sarawak and Sabah take longer than cargo for the peninsula?

Because there is no direct mainline call. Cargo for East Malaysia tranships, usually at Singapore or Port Klang, and waits for a feeder to Borneo. No amount of paperwork speed recovers that wait, so the useful move is to plan around it: order offshore and plant spares a sailing earlier, and keep air freight for a line that is genuinely down rather than for a schedule that slipped.

05

Who lodges the K1 import declaration?

The importer does, through Royal Malaysian Customs, before the goods arrive. We supply the documents it rests on: commercial invoice and packing list, a Dubai Chamber attested Certificate of Origin before dispatch, the bill of lading or air waybill, any SIRIM certificate of approval for lines in scope, and material and test certificates where the order calls for them. Consistent descriptions across all of them keep the declaration from being queried.

06

Which hose and seal compounds suit palm oil mills and refineries?

Ones specified against the actual fluid, because vegetable oils and esters are not mineral oil to an elastomer. A compound that is stable in mineral hydraulic oil can swell or harden in palm oil or a biodegradable ester fluid, and the failure arrives months later looking like ordinary wear. Tell us the real fluid and temperature rather than the category, and we will specify the hose tube and seals against it.

07

Which oilfield equipment do you supply for Malaysian offshore and onshore work?

We supply equipment to API 6A for wellheads, API 16A for BOPs, API 16C for choke and kill and API 7K for drilling hose, with NACE MR0175 material documentation where the contract requires it; monogram status is confirmed per item at quotation. We supply TechnipFMC, Cameron (SLB), SPM, Anson, Stream-Flo and WOM equipment, so wellhead parts and flow iron can ship alongside hydraulic hose on one consignment.

08

Can you make up hose assemblies for plant in Penang, Prai or Ipoh?

Yes. Assemblies are crimped in Dubai, pressure-tested and tagged before packing, so they arrive at a northern-region plant ready to fit. Send the bore, thread and working pressure, or a photograph of the failed assembly with its layline, plus the length between fitting faces. The tag carries the hose, fitting and test date, so a repeat order can be placed by reference and arrives identical to the first.

09

Can you deliver to Kerteh, Kemaman or Kuantan on the east coast?

Yes, on DAP terms to the base or plant gate. Goods land on the mainline sailing at Port Klang or Pasir Gudang and complete by road across the peninsula, and that road leg is priced at quotation rather than estimated. For Terengganu oil and gas bases and the Kuantan industrial area, name the site and any gate-entry or delivery-window rules, and we will build them into the quotation.

10

Do you supply certified lifting gear for Malaysian yards and offshore bases?

Yes. Wire rope and chain slings, shackles, hooks and rigging hardware ship from Dubai marked with their working load limit and with the manufacturer’s test certificates the order calls for. Whether a lifting line falls inside a SIRIM-regulated category is confirmed from the part list at quotation, along with the rest of the order. Examination on site stays with your appointed lifting inspector; send the certificate format they require and we confirm the document set.

11

Is air freight into Kuala Lumpur worth it for a breakdown?

For a line that is down, usually yes: two to four days from DXB to KUL against 14–18 days by sea to Port Klang, and longer again to Borneo. For a planned shutdown it rarely is, because a SIRIM step, where one applies, does not move faster for flying. Air also suits a single assembly needed in Sarawak or Sabah, where the sea leg runs 22–30 days.

12

What should a Malaysian enquiry include so you can quote it accurately?

The delivery town first, because it decides between Port Klang, Pasir Gudang and the Borneo leg. Then the part list with sizes, threads and pressures, which tells us which lines fall inside SIRIM scope. For hose on palm oil, vegetable-oil or converted biodegradable-fluid service, name the actual fluid. Add any API or certificate requirement, and the quotation comes back with freight, Incoterm and documents fixed.

Next step

Shipping to Malaysia?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp usEmail the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · MY

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets