Weld-On Hook
Weld-On Hook, in 8 sizes, 5/16″ to 10 t, WLL 2 to 10 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Weld-On Hook
- Size range: 5/16″ to 10 t
- Working load limit: 2 to 10 t
- Size range
- 5/16″ to 10 t
- Working load limit
- 2 to 10 t
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain.
Sizes and ratings
8 sizes, 5/16″ to 10 t. Working load limit 2 to 10 t. Minimum breaking load 10 to 50 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Minimum ultimate load is 4 times the working load limit (a 4:1 design factor).
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Weld-On Hook |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5/16″ to 10 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 2 to 10 t |
| Minimum breaking load | 10 to 50 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | Size | Type | WLL (t) | WLL (lbs) | Min breaking load (t) | E (mm) | L (mm) | R (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-HK-WLD-031 | 5/16″ | Standard | — | 3,900 | — | 11 | 54 | 31 | 0.19 |
| IH-LR-HK-WLD-038 | 3/8″ | Standard | — | 9,200 | — | 16.5 | 85 | 44 | 0.86 |
| IH-LR-HK-WLD-050 | 1/2″ | Standard | — | 12,700 | — | 20.5 | 102 | 51 | 1.23 |
| IH-LR-HK-WLD-2T-G80 | 2 t | Grade 80 | 2 | — | 10 | — | — | — | 0.83 |
| IH-LR-HK-WLD-3T-G80 | 3 t | Grade 80 | 3 | — | 15 | — | — | — | 1.2 |
| IH-LR-HK-WLD-5T-G80 | 5 t | Grade 80 | 5 | — | 25 | — | — | — | 2.46 |
| IH-LR-HK-WLD-8T-G80 | 8 t | Grade 80 | 8 | — | 40 | — | — | — | 3.26 |
| IH-LR-HK-WLD-10T-G80 | 10 t | Grade 80 | 10 | — | 50 | — | — | — | 5.17 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the weld-on hook come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Anschweißstutzen
- fr
- raccord à souder
- es
- racor para soldar
- it
- raccordo a saldare
Engineers viewing this also looked at
Shank Hoist Hook — 319 Pattern
Shank Hoist Hook with Latch — 319 Pattern
Eye Hoist Hook — 320 Pattern
Eye Hoist Hook with Latch — 320 Pattern
Swivel Hoist Hook — 322 Pattern
Swivel Hoist Hook with Latch — 322 Pattern
Eye Grab Hook — H-323 / A-323 Pattern
