Forged Eye Snap Hook with Safety Latch
Forged Eye Snap Hook with Safety Latch, in 2 sizes, 7/16″ to 9/16″, WLL 750 to 1,000 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Forged Eye Snap Hook with Safety Latch
- Size range: 7/16″ to 9/16″
- Working load limit: 750 to 1,000 lbs
- Size range
- 7/16″ to 9/16″
- Working load limit
- 750 to 1,000 lbs
- Material
- Carbon steel
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Carbon steel.
Sizes and ratings
2 sizes, 7/16″ to 9/16″. Working load limit 750 to 1,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Forged Eye Snap Hook with Safety Latch |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 7/16″ to 9/16″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 750 to 1,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
2 sizes| Indus part no. | Size | Chain size | WLL (lbs) | A (mm) | C (mm) | E (mm) | F (mm) | G (mm) | H (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-HK-FESHSL-044 | 7/16″ | 7/16″ | 750 | 6.35 | 57.15 | 100.1 | 82.55 | 19.05 | 19.05 | 0.23 |
| IH-LR-HK-FESHSL-056 | 9/16″ | 9/16″ | 1,000 | 8.636 | 68.33 | 120.6 | 97.54 | 28.45 | 20.57 | 0.48 |
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the forged eye snap hook with safety latch come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 80 Clevis Container Hook
Grade 80 Container Hook
Grade 80 Container Lifting Clevis Link
Grade 80 Clevis Skip Hook with Container Clevis Link and Gated Catch
J Hook with Oval Eye
Lifting Eye Hook with Latch — DIN 689
Stainless Steel Large Eye Hook with Latch
