Grade 80 Container Lifting Clevis Link — 21.5 mm

Grade 80 Container Lifting Clevis Link, in 1 size, 21.5 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Grade 80 Container Lifting Clevis Link
- Size range: 21.5 mm
- Size range
- 21.5 mm
- Material
- Alloy steel
- Finish
- Powder coated
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Alloy steel, powder coated.
Sizes
1 size, 21.5 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / quenched and tempered.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Container Lifting Clevis Link |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 21.5 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-LR-HK-G80CLCL-21P5MM
- Size
- 21.5 mm
- WLL, Grade 80 (t)
- 5.3
- WLL, Grade 100 (t)
- 6.7
- Min breaking load, Grade 80 (t)
- 21.2
- Min breaking load, Grade 100 (t)
- 26.8
- A (mm)
- 21
- B (mm)
- 90
- C (mm)
- 50
- D (mm)
- 21.5
- E (mm)
- 55
- F (mm)
- 15
- G (mm)
- 16.2
- L (mm)
- 170
- M (mm)
- 35
- N (mm)
- 93
- Weight (kg)
- 1.23
Size — Nominal size as the manufacturer states it. WLL, Grade 80 — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL, Grade 100 — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load, Grade 80 — Minimum breaking load. A test figure — never lift to it. Min breaking load, Grade 100 — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. N — Dimension N on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 80 Container Lifting Clevis Link and what is it used for?▾
How are the Indus part numbers for the Grade 80 Container Lifting Clevis Link structured?▾
What sizes does the Grade 80 Container Lifting Clevis Link come in?▾
How do I choose the right size of Grade 80 Container Lifting Clevis Link?▾
What load rating does the Grade 80 Container Lifting Clevis Link have?▾
What is the Grade 80 Container Lifting Clevis Link made from?▾
Does the Grade 80 Container Lifting Clevis Link come with a test certificate?▾
What should the Grade 80 Container Lifting Clevis Link be used with?▾
How should the Grade 80 Container Lifting Clevis Link be inspected and used safely?▾
Where is the Grade 80 Container Lifting Clevis Link typically used?▾
How does the Grade 80 Container Lifting Clevis Link differ from the Grade 80 Container Hook?▾
Do you stock the Grade 80 Container Lifting Clevis Link in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lifting hook types: eye, clevis and swivel hooks, sling vs grab hooks, and latches
Hooks are chosen on two things: how they attach (eye, clevis, shank or swivel) and what they do (a sling or slip hook holds a load in its bowl; a grab hook grips a chain link). Use a grab hook to shorten a chain and the sling loses 20% unless the hook is a cradle type. Here is how the types differ, and when a hook comes out of service.
6 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read
Lifting & rigging
Stainless steel lifting chain: Grade 60 ratings, where it is worth it, and its limits
Stainless steel chain lifts where galvanised alloy chain would rust or contaminate: food plants, water treatment, marine and offshore. It carries less than Grade 80 at the same size, and chlorides in warm air can crack it. Ratings from our Grade 60 table, where stainless is worth it, which stainless chain to avoid for lifting, and how to look after it.
3 min read








