Stainless Steel Eye Grab Hook
Stainless Steel Eye Grab Hook, in 4 sizes, 1/4″ to 1/2″, WLL 1,250 to 3,600 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Eye Grab Hook
- Size range: 1/4″ to 1/2″
- Working load limit: 1,250 to 3,600 lbs
- Size range
- 1/4″ to 1/2″
- Working load limit
- 1,250 to 3,600 lbs
- Material
- Stainless steel 304 or 316
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Stainless steel 304 or 316.
Sizes and ratings
4 sizes, 1/4″ to 1/2″. Working load limit 1,250 to 3,600 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Eye Grab Hook |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 1/2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1,250 to 3,600 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | WLL (lbs) | Inside length (mm) | Weight (lbs) |
|---|---|---|---|---|
| IH-LR-HK-SSEG-025 | 1/4″ | 1,250 | 63.5 | 0.28 |
| IH-LR-HK-SSEG-031 | 5/16″ | 1,800 | 70.6 | 0.51 |
| IH-LR-HK-SSEG-038 | 3/8″ | 2,500 | 82 | 0.76 |
| IH-LR-HK-SSEG-050 | 1/2″ | 3,600 | 104.1 | 1.6 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Inside length — Inside length of the link or bow. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel eye grab hook come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Eye Hoist Hook with Latch — S-320 Pattern
Stainless Steel Swivel Eye Hook with Latch
T Hook — Carbon and Alloy
T-J Hook — Carbon and Alloy
T Shank Hook
Weld-On Hook
Shank Hoist Hook — 319 Pattern
