Stainless Steel Clevis Swivel Hook with Latch
Stainless Steel Clevis Swivel Hook with Latch, in 5 sizes, 3/16″ to 1/2″. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Clevis Swivel Hook with Latch
- Size range: 3/16″ to 1/2″
- Size range
- 3/16″ to 1/2″
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Type 304 or type 316 stainless steel, polished.
Sizes
5 sizes, 3/16″ to 1/2″. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Casting / forging.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Clevis Swivel Hook with Latch |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/16″ to 1/2″ |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
5 sizes| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| IH-LR-HK-CSHLSS-019 | 3/16″ | 9.5 | 17.6 | 11 | 90 | 0.09 |
| IH-LR-HK-CSHLSS-025 | 1/4″ | 12.5 | 23.9 | 16.9 | 114 | 0.167 |
| IH-LR-HK-CSHLSS-031 | 5/16″ | 15 | 26.7 | 20.5 | 138 | 0.259 |
| IH-LR-HK-CSHLSS-038 | 3/8″ | 17.5 | 32.8 | 23.5 | 158 | 0.456 |
| IH-LR-HK-CSHLSS-050 | 1/2″ | 36 | 37.8 | 31 | 190 | 0.748 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel clevis swivel hook with latch come in?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Clevis Slip Hook with Latch — Carbon and Alloy
Eye Bend Hook, Forged Alloy — Type A
Stainless Steel Eye Slip Hook with Latch
Eye Sling Hook with Triangle Ring
Eye Twist Hook (Reverse Eye Hook)
Forged Eye Snap Hook with Safety Latch
Grade 80 Clevis Container Hook
