Stainless Steel Eye Slip Hook with Latch
Stainless Steel Eye Slip Hook with Latch, in 4 sizes, WLL 17.8 to 53.4 kN. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Eye Slip Hook with Latch
- Working load limit: 17.8 to 53.4 kN
- Working load limit
- 17.8 to 53.4 kN
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Type 304 or type 316 stainless steel, polished.
Sizes and ratings
4 sizes. Working load limit 17.8 to 53.4 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Casting / forging.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Eye Slip Hook with Latch |
| Sizes | 4 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 17.8 to 53.4 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | WLL (kN) | A (mm) | E (mm) | L (mm) |
|---|---|---|---|---|---|
| IH-LR-HK-ESHLSS-6MM | 6 mm (1/4″) | 17.8 | 13 | 17 | 64 |
| IH-LR-HK-ESHLSS-8MM | 8 mm (5/16″) | 26.7 | 16 | 18 | 73 |
| IH-LR-HK-ESHLSS-10MM | 10 mm (3/8″) | 35.6 | 18 | 23 | 85 |
| IH-LR-HK-ESHLSS-12MM | 12 mm (1/2″) | 53.4 | 23 | 31 | 108 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel eye slip hook with latch come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Eye Sling Hook with Triangle Ring
Eye Twist Hook (Reverse Eye Hook)
Forged Eye Snap Hook with Safety Latch
Grade 80 Clevis Container Hook
Grade 80 Container Hook
Grade 80 Container Lifting Clevis Link
Grade 80 Clevis Skip Hook with Container Clevis Link and Gated Catch
