T-J Hook — Carbon and Alloy

T-J Hook, in 1 size, 5/16″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: T-J Hook
- Size range: 5/16″
- Size range
- 5/16″
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain.
Sizes and ratings
1 size, 5/16″. Minimum breaking load alloy 15,600 lbs; carbon 11,700 lbs. Carbon- and alloy-steel versions share a frame but not a rating, so each is its own row in the table. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | T-J Hook |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5/16″ |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | alloy 15,600 lbs; carbon 11,700 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-LR-HK-TJ-031-C
- Size
- 5/16″
- Grade
- Carbon steel
- Min breaking load (lbs)
- 11,700
- A (mm)
- 723.9
- B (mm)
- 322.6
- L (mm)
- 2,896
- LT (mm)
- 2,553
- Weight (kg)
- 0.32
- Indus part no.IH-LR-HK-TJ-031-A
- Size
- 5/16″
- Grade
- Alloy steel
- Min breaking load (lbs)
- 15,600
- A (mm)
- 723.9
- B (mm)
- 322.6
- L (mm)
- 2,896
- LT (mm)
- 2,553
- Weight (kg)
- 0.32
Size — Nominal size as the manufacturer states it. Grade — Material grade of this row — carbon and alloy versions share a frame but not a rating. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. LT — Dimension LT on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the T-J Hook — Carbon and Alloy and what is it used for?▾
How are the Indus part numbers for the T-J Hook — Carbon and Alloy structured?▾
What sizes does the T-J Hook — Carbon and Alloy come in?▾
How do I choose the right size of T-J Hook — Carbon and Alloy?▾
What load rating does the T-J Hook — Carbon and Alloy have?▾
What is the T-J Hook — Carbon and Alloy made from?▾
Does the T-J Hook — Carbon and Alloy come with a test certificate?▾
What should the T-J Hook — Carbon and Alloy be used with?▾
How should the T-J Hook — Carbon and Alloy be inspected and used safely?▾
Where is the T-J Hook — Carbon and Alloy typically used?▾
How does the T-J Hook — Carbon and Alloy differ from the R Hook — Carbon and Alloy?▾
Do you stock the T-J Hook — Carbon and Alloy in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lifting hook types: eye, clevis and swivel hooks, sling vs grab hooks, and latches
Hooks are chosen on two things: how they attach (eye, clevis, shank or swivel) and what they do (a sling or slip hook holds a load in its bowl; a grab hook grips a chain link). Use a grab hook to shorten a chain and the sling loses 20% unless the hook is a cradle type. Here is how the types differ, and when a hook comes out of service.
6 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read
Lifting & rigging
Stainless steel lifting chain: Grade 60 ratings, where it is worth it, and its limits
Stainless steel chain lifts where galvanised alloy chain would rust or contaminate: food plants, water treatment, marine and offshore. It carries less than Grade 80 at the same size, and chlorides in warm air can crack it. Ratings from our Grade 60 table, where stainless is worth it, which stainless chain to avoid for lifting, and how to look after it.
3 min read








