Eye Bend Hook, Forged Alloy — Type A
Eye Bend Hook, Forged Alloy, in 3 sizes, 5/16″ to 1/2″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Eye Bend Hook, Forged Alloy
- Size range: 5/16″ to 1/2″
- Size range
- 5/16″ to 1/2″
- Material
- Alloy steel
- Finish
- Powder coated / hot dipped galvanized / zinc plated / self colour
Product description
A lifting hook carries a load in its bowl — on a hoist, a sling leg or a chain. Alloy steel, powder coated / hot dipped galvanized / zinc plated / self colour.
Sizes and ratings
3 sizes, 5/16″ to 1/2″. Minimum breaking load 10,000 to 27,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Seat the load at the bottom of the bowl, never on the tip, and use a latch wherever it could bounce free. Carbon and alloy versions of the same hook share a frame but not a rating, so order the row whose WLL covers your load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Eye Bend Hook, Forged Alloy |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5/16″ to 1/2″ |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 10,000 to 27,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated / hot dipped galvanized / zinc plated / self colour |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Size | Min breaking load (lbs) | A (mm) | K (mm) | L (mm) | O (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|
| IH-LR-HK-EBHFA-031 | 5/16″ | 10,000 | 7.938 | 2.24 | 3.07 | 0.51 | 0.81 |
| IH-LR-HK-EBHFA-038 | 3/8″ | 13,000 | 9.525 | 2.71 | 3.97 | 0.67 | 1.76 |
| IH-LR-HK-EBHFA-050 | 1/2″ | 27,000 | 12.7 | 3.26 | 4.4 | 0.82 | 2.97 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. O — Dimension O on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the eye bend hook, forged alloy come in?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Eye Slip Hook with Latch
Eye Sling Hook with Triangle Ring
Eye Twist Hook (Reverse Eye Hook)
Forged Eye Snap Hook with Safety Latch
Grade 80 Clevis Container Hook
Grade 80 Container Hook
Grade 80 Container Lifting Clevis Link
