Precast Concrete Lifting Clutch — 1.3–32 t WLL

Precast Concrete Lifting Clutch, in 6 sizes, 1.3 t to 32 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Precast Concrete Lifting Clutch
- Size range: 1.3 t to 32 t
- Working load limit: 1.3 to 32 t
- Size range
- 1.3 t to 32 t
- Working load limit
- 1.3 to 32 t
- Material
- Alloy steel
- Finish
- Powder coated / zinc plated
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Alloy steel, powder coated / zinc plated.
Sizes and ratings
6 sizes, 1.3 t to 32 t. Working load limit 1.3 to 32 t. Minimum breaking load 5.2 to 128 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged , cast.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Rate the point for the load and the direction of pull. A swivel point follows the sling; a fixed eye loses capacity when pulled off its axis. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Precast Concrete Lifting Clutch |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1.3 t to 32 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.3 to 32 t |
| Minimum breaking load | 5.2 to 128 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated / zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-LP-PCLC-1P3T
- Size
- 1.3 t
- WLL (t)
- 1.3
- Min breaking load (t)
- 5.2
- A (mm)
- 33
- B (mm)
- 42
- C (mm)
- 80.4
- D (mm)
- 70.5
- E (mm)
- 45
- F (mm)
- 73
- G (mm)
- 20.5
- H (mm)
- 160
- K (mm)
- 12.5
- L (mm)
- 186
- M (mm)
- 11
- Weight (kg)
- 0.89
- Indus part no.IH-LR-LP-PCLC-2P5T
- Size
- 2.5 t
- WLL (t)
- 2.5
- Min breaking load (t)
- 10
- A (mm)
- 41
- B (mm)
- 49
- C (mm)
- 102
- D (mm)
- 85
- E (mm)
- 57
- F (mm)
- 88
- G (mm)
- 27
- H (mm)
- 188
- K (mm)
- 14
- L (mm)
- 227
- M (mm)
- 16
- Weight (kg)
- 1.3
- Indus part no.IH-LR-LP-PCLC-5T
- Size
- 5 t
- WLL (t)
- 5
- Min breaking load (t)
- 20
- A (mm)
- 55
- B (mm)
- 70
- C (mm)
- 133
- D (mm)
- 88
- E (mm)
- 69
- F (mm)
- 110
- G (mm)
- 35
- H (mm)
- 242
- K (mm)
- 18
- L (mm)
- 282
- M (mm)
- 22
- Weight (kg)
- 3.24
- Indus part no.IH-LR-LP-PCLC-10T
- Size
- 10 t
- WLL (t)
- 10
- Min breaking load (t)
- 40
- A (mm)
- 73
- B (mm)
- 92
- C (mm)
- 176
- D (mm)
- 116
- E (mm)
- 83
- F (mm)
- 161
- G (mm)
- 51
- H (mm)
- 342
- K (mm)
- 27
- L (mm)
- 391
- M (mm)
- 30
- Weight (kg)
- 10
- Indus part no.IH-LR-LP-PCLC-20T
- Size
- 20 t
- WLL (t)
- 20
- Min breaking load (t)
- 80
- A (mm)
- 110
- B (mm)
- 114.5
- C (mm)
- 224
- D (mm)
- 133.5
- E (mm)
- 107.5
- F (mm)
- 182
- G (mm)
- 77
- H (mm)
- 437
- K (mm)
- 31
- L (mm)
- 497
- M (mm)
- 42
- Weight (kg)
- 20.4
- Indus part no.IH-LR-LP-PCLC-32T
- Size
- 32 t
- WLL (t)
- 32
- Min breaking load (t)
- 128
- A (mm)
- 154
- B (mm)
- 172
- C (mm)
- 307
- D (mm)
- 189
- E (mm)
- 164
- F (mm)
- 272
- G (mm)
- 102
- H (mm)
- 560
- K (mm)
- 40
- L (mm)
- 661
- M (mm)
- 52
- Weight (kg)
- 46.5
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Precast Concrete Lifting Clutch and what is it used for?▾
How are the Indus part numbers for the Precast Concrete Lifting Clutch structured?▾
What sizes does the Precast Concrete Lifting Clutch come in?▾
How do I choose the right size of Precast Concrete Lifting Clutch?▾
What is the working load limit of the Precast Concrete Lifting Clutch?▾
What is the Precast Concrete Lifting Clutch made from?▾
Does the Precast Concrete Lifting Clutch come with a test certificate?▾
What should the Precast Concrete Lifting Clutch be used with?▾
How should the Precast Concrete Lifting Clutch be inspected and used safely?▾
Where is the Precast Concrete Lifting Clutch typically used?▾
How does the Precast Concrete Lifting Clutch differ from the Rectangular Base Deck Eye Plate?▾
Do you stock the Precast Concrete Lifting Clutch in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Precast panel and beam rigging: slings, clutches and multi-leg rules above the anchor
A precast element is lifted on anchors cast into it, but the anchors are only half the system. The clutches, chain slings, master link and spreader above them decide whether the load is shared as designed. How to rig precast panels and beams, why a four-leg sling rarely shares a rigid load evenly, and what regulators’ codes say about anchors, clutches and rigging diagrams.
4 min read
Lifting & rigging
Precast concrete lifting clutches: how spherical-head anchor systems work, and how to use them safely
A lifting clutch hooks onto the spherical head of an anchor cast into a precast unit, and is released by hand once the unit is set down. The system is only as safe as its weakest decision: the anchor’s load class, the concrete’s strength at lifting, and the angle of pull. Here is how the system works and the rules makers set.
5 min read








