Piling Shackle, Long Dee
Piling Shackle, Long Dee, in 6 sizes, 1 t to 5 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Piling Shackle, Long Dee
- Size range: 1 t to 5 t
- Working load limit: 1 to 5 t
- Size range
- 1 t to 5 t
- Working load limit
- 1 to 5 t
- Material
- High tensile steel grade 4
- Finish
- Self colour / zinc plated / hot dipped galvanized
Product description
A shackle joins a sling, hook or chain to a lifting point and opens with a removable pin. High tensile steel grade 4, self colour / zinc plated / hot dipped galvanized.
Sizes and ratings
6 sizes, 1 t to 5 t. Working load limit 1 to 5 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged.
Choosing a size
Choose on working load limit for the pull you will actually apply. A chain (dee) shackle takes an in-line pull; an anchor (bow) shackle accepts several slings or an angled pull. Side-loading reduces the rating, and a screw pin must be fully seated before loading.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Piling Shackle, Long Dee |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1 t to 5 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1 to 5 t |
Construction
| Parameter | Value |
|---|---|
| Material | High tensile steel grade 4 |
| Finish | Self colour / zinc plated / hot dipped galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes| Indus part no. | Size | WLL (t) | a (mm) | b (mm) | d (mm) | c (mm) | e (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-SH-PSLD-1T | 1 t | 1 | 13 | 16 | 22 | 32 | 152 | 0.55 |
| IH-LR-SH-PSLD-1P5T | 1.5 t | 1.5 | 16 | 19 | 32 | 38 | 203 | 0.95 |
| IH-LR-SH-PSLD-2T | 2 t | 2 | 19 | 22 | 38 | 45 | 203 | 1.64 |
| IH-LR-SH-PSLD-3T | 3 t | 3 | 22 | 25 | 45 | 50 | 254 | 2.29 |
| IH-LR-SH-PSLD-3P75T | 3.75 t | 3.75 | 25 | 28 | 50 | 57 | 254 | 3.4 |
| IH-LR-SH-PSLD-5T | 5 t | 5 | 28 | 32 | 54 | 64 | 305 | 5.05 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. a — Dimension a on the manufacturer dimension drawing. b — Dimension b on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. c — Dimension c on the manufacturer dimension drawing. e — Dimension e on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the piling shackle, long dee come in?▾
What is the working load limit?▾
What do G-209, G-2130 and G-213 mean?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Shackle — DIN 82101 Form A, B and C Pattern, Galvanized
Stainless Steel Strip D Shackle — Flat Pin
Stainless Steel Screw Pin Anchor Shackle — US Type
Grade S Shackle — AS 2741, Safety Pin
Grade S Shackle — AS 2741, Screw Pin
Stainless Steel Bolt-Type Anchor Shackle — G-2130 Pattern
Stainless Steel Bolt-Type Chain Shackle — G-2150 Pattern
