Malleable Cleat — Hot-Dip Galvanized
Malleable Cleat, in 8 sizes, 4″ to 18″. Load rating on request. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Malleable Cleat
- Size range: 4″ to 18″
- Size range
- 4″ to 18″
- Material
- Malleable iron
- Finish
- Hot-dip galvanized
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Malleable iron, hot-dip galvanized.
Sizes
8 sizes, 4″ to 18″. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Malleable Cleat |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 4″ to 18″ |
Construction
| Parameter | Value |
|---|---|
| Material | Malleable iron |
| Finish | Hot-dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | Size | Hole dia. (mm) | Weight (kg) |
|---|---|---|---|
| IH-LR-RL-CLT-400 | 4″ | 6 | 0.106 |
| IH-LR-RL-CLT-500 | 5″ | 6.5 | 0.143 |
| IH-LR-RL-CLT-600 | 6″ | 7.9 | 0.17 |
| IH-LR-RL-CLT-800 | 8″ | 9.5 | 0.68 |
| IH-LR-RL-CLT-1000 | 10″ | 11.1 | 0.936 |
| IH-LR-RL-CLT-1200 | 12″ | 12.7 | 1.62 |
| IH-LR-RL-CLT-1400 | 14″ | 14.3 | 2.67 |
| IH-LR-RL-CLT-1800 | 18″ | 17.7 | 4.99 |
Size — Nominal size as the manufacturer states it. Hole dia. — Diameter of the fixing hole. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the malleable cleat come in?▾
Can a swivel rotate under load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Cold Shut Link — Zinc Plated
Double Clevis Link
Stainless Steel D Ring Wire Support
Eye Swivel — JIS Type, Single Eye
Chain Swivel — G-401 Pattern, Hot-Dip Galvanized
Jaw End Swivel
Weldless Pear Link — Carbon and Alloy
