Rectangular Base Deck Eye Plate
Rectangular Base Deck Eye Plate (BS type), in 11 sizes, 45 mm to 229 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Rectangular Base Deck Eye Plate
- Pattern / standard: BS type
- Size range: 45 mm to 229 mm
- Size range
- 45 mm to 229 mm
- Material
- High tensile steel C1045
- Finish
- Self-colour finish
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Built to the BS pattern. High tensile steel C1045, self-colour finish.
Sizes
11 sizes, 45 mm to 229 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged / quenched and tempered.
Choosing a size
Rate the point for the load and the direction of pull. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Rectangular Base Deck Eye Plate |
| Pattern / standard | BS type |
| Sizes | 11 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 45 mm to 229 mm |
Construction
| Parameter | Value |
|---|---|
| Material | High tensile steel C1045 |
| Finish | Self-colour finish |
Shipping & lead time
Sizes & part numbers
11 sizes| Indus part no. | Size | Proof load (t) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-LP-RBDEP-45MM | 45 mm | 2 | 20 | 25 | 45 | 6 | 38 | 0.14 |
| IH-LR-LP-RBDEP-60MM | 60 mm | 3.5 | 25 | 35 | 60 | 8 | 50 | 0.31 |
| IH-LR-LP-RBDEP-70MM | 70 mm | 5.5 | 32 | 45 | 70 | 10 | 64 | 0.45 |
| IH-LR-LP-RBDEP-85MM | 85 mm | 7.5 | 338 | 50 | 85 | 12 | 76 | 0.79 |
| IH-LR-LP-RBDEP-102MM | 102 mm | 9.6 | 44 | 61 | 102 | 12 | 88 | 1.36 |
| IH-LR-LP-RBDEP-115MM | 115 mm | 13 | 50 | 70 | 115 | 16 | 100 | 1.82 |
| IH-LR-LP-RBDEP-130MM | 130 mm | 15.75 | 56 | 76 | 130 | 18 | 114 | 2.95 |
| IH-LR-LP-RBDEP-145MM | 145 mm | 20 | 64 | 85 | 145 | 19 | 128 | 3.86 |
| IH-LR-LP-RBDEP-170MM | 170 mm | 29 | 76 | 100 | 170 | 22 | 152 | 6.58 |
| IH-LR-LP-RBDEP-200MM | 200 mm | 39 | 89 | 121 | 200 | 27 | 178 | 18 |
| IH-LR-LP-RBDEP-229MM | 229 mm | 50 | 102 | 137 | 229 | 30 | 203 | 25 |
Size — Nominal size as the manufacturer states it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the rectangular base deck eye plate come in?▾
Can I lift at an angle from an eye bolt?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 80 Swivel Lifting Point
Stainless Steel Drop Forged Weld-on D Ring
Stainless Steel Diamond Pad Eye
Stainless Steel Diamond Pad Eye with Ring
Stainless Steel Oblong Pad Eye
Stainless Steel Oblong Pad Eye Plate with Ring
Stainless Steel Round Eye Plate with Threaded Stud
