Lynch Pin — 4.4–10.4 mm

Lynch Pin, in 4 sizes, 4.4 mm to 10.4 mm. Indus part numbers.
Key features
- Product type: Lynch Pin
- Size range: 4.4 mm to 10.4 mm
- Size range
- 4.4 mm to 10.4 mm
- Material
- Carbon steel
- Finish
- Electro-galvanized(yellow zinc plated)
Product description
Retaining pins that keep a clevis pin, bolt or hitch pin in place. Carbon steel, electro-galvanized(yellow zinc plated).
Sizes
4 sizes, 4.4 mm to 10.4 mm. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Choosing a size
Size the pin to the hole it passes through and the pin it retains. These retainers do not carry the load; replace one that is bent or has lost its spring.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Lynch Pin |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 4.4 mm to 10.4 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Electro-galvanized(yellow zinc plated) |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-RP-LP-4P4MM
- Size
- 4.4 mm
- Type
- Stainless steel
- A (mm)
- 4.4
- B (mm)
- 36.5
- C (mm)
- 7.1
- Weight (kg)
- 0.015
- Indus part no.IH-LR-RP-LP-6MM
- Size
- 6 mm
- Type
- Stainless steel
- A (mm)
- 6
- B (mm)
- 40.5
- C (mm)
- 8.6
- Weight (kg)
- 0.025
- Indus part no.IH-LR-RP-LP-7P5MM
- Size
- 7.5 mm
- Type
- Stainless steel
- A (mm)
- 7.5
- B (mm)
- 41.5
- C (mm)
- 9.5
- Weight (kg)
- 0.03
- Indus part no.IH-LR-RP-LP-10P4MM
- Size
- 10.4 mm
- Type
- Stainless steel
- A (mm)
- 10.4
- B (mm)
- 39
- C (mm)
- 12
- Weight (kg)
- 0.045
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Lynch Pin and what is it used for?▾
Which sizes of Lynch Pin are available?▾
How do I size the Lynch Pin for a job?▾
Does the Lynch Pin have a working load limit?▾
How do I order a specific size of the Lynch Pin?▾
How does the Lynch Pin compare with the Bent Hitch Pin?▾
What is the Lynch Pin made of?▾
Which standard does the Lynch Pin meet?▾
What can the Lynch Pin be connected to?▾
How do I inspect the Lynch Pin before use?▾
What are the typical applications of the Lynch Pin?▾
Does Indus stock the Lynch Pin in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog





