Grade 80 Weld-On Pivoting D Link
Grade 80 Weld-On Pivoting D Link (EN 1677), in 7 sizes, 1.12 t to 15 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Weld-On Pivoting D Link
- Pattern / standard: EN 1677
- Size range: 1.12 t to 15 t
- Working load limit: 1.12 to 15 t
- Size range
- 1.12 t to 15 t
- Working load limit
- 1.12 to 15 t
- Material
- Alloy steel
- Finish
- Powder coated + self colour
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Made to EN 1677. Alloy steel, powder coated + self colour.
Sizes and ratings
7 sizes, 1.12 t to 15 t. Working load limit 1.12 to 15 t. Minimum breaking load 4.48 to 60 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Rate the point for the load and the direction of pull. A swivel point follows the sling; a fixed eye loses capacity when pulled off its axis. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Weld-On Pivoting D Link |
| Pattern / standard | EN 1677 |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1.12 t to 15 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.12 to 15 t |
| Minimum breaking load | 4.48 to 60 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated + self colour |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
7 sizes| Indus part no. | Size | WLL (t) | Min breaking load (t) | A (mm) | B (mm) | D (mm) | H (mm) | M (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-LP-80WPDL-1P12T | 1.12 t | 1.12 | 4.48 | 41 | 78.5 | 13 | 33.5 | 37 | 0.4 |
| IH-LR-LP-80WPDL-2T | 2 t | 2 | 8 | 42 | 88 | 14 | 35.5 | 38 | 0.47 |
| IH-LR-LP-80WPDL-3P15T | 3.15 t | 3.15 | 12.8 | 45 | 94 | 17 | 39 | 43.5 | 0.69 |
| IH-LR-LP-80WPDL-5P3T | 5.3 t | 5.3 | 21.2 | 55 | 118 | 22 | 49 | 50 | 1.46 |
| IH-LR-LP-80WPDL-8T | 8 t | 8 | 32 | 70 | 141 | 26.5 | 54 | 70.5 | 2.5 |
| IH-LR-LP-80WPDL-10T | 10 t | 10 | 40 | 85 | 165 | 28 | 63.5 | 78 | 3.6 |
| IH-LR-LP-80WPDL-15T | 15 t | 15 | 60 | 97 | 188 | 34 | 72 | 90 | 5.8 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 80 weld-on pivoting d link come in?▾
What is the working load limit?▾
Can I lift at an angle from an eye bolt?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Anschweißstutzen
- fr
- raccord à souder
- es
- racor para soldar
- it
- raccordo a saldare
From the blog
Written about this part
Engineers viewing this also looked at
Black Coated Strap Staple
Grade 80 Bolt-On Lifting Point
Grade 80 Double Swivel Shackle
Galvanized Ring on Plate
Galvanized Staple on Plate
Galvanized Steel Hook on Plate
Mini Lashing D Ring on Plate
