Jaw End Swivel — 850–45,200 lbs WLL

Jaw End Swivel, in 10 sizes, 1/4″ to 1-1/2″, WLL 850 to 45,200 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Jaw End Swivel
- Size range: 1/4″ to 1-1/2″
- Working load limit: 850 to 45,200 lbs
- Size range
- 1/4″ to 1-1/2″
- Working load limit
- 850 to 45,200 lbs
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting.
Sizes and ratings
10 sizes, 1/4″ to 1-1/2″. Working load limit 850 to 45,200 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Minimum ultimate load is 5 times the working load limit (a 5:1 design factor).
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Jaw End Swivel |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 1-1/2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 850 to 45,200 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
10 sizes- Indus part no.IH-LR-RL-JES-025
- Size
- 1/4″
- WLL (lbs)
- 850
- B (mm)
- 17.5
- C (mm)
- 19
- K (mm)
- 11.9
- M (mm)
- 7.9
- N (mm)
- 22.4
- P (mm)
- 6.3
- R (mm)
- 66.8
- Weight (lbs)
- 0.21
- Indus part no.IH-LR-RL-JES-031
- Size
- 5/16″
- WLL (lbs)
- 1,250
- B (mm)
- 20.6
- C (mm)
- 25.4
- K (mm)
- 12.7
- M (mm)
- 9.7
- N (mm)
- 22.4
- P (mm)
- 7.9
- R (mm)
- 74.7
- Weight (lbs)
- 0.34
- Indus part no.IH-LR-RL-JES-038
- Size
- 3/8″
- WLL (lbs)
- 2,250
- B (mm)
- 23.9
- C (mm)
- 31.8
- K (mm)
- 16
- M (mm)
- 12.7
- N (mm)
- 26.9
- P (mm)
- 9.7
- R (mm)
- 92.2
- Weight (lbs)
- 0.66
- Indus part no.IH-LR-RL-JES-050
- Size
- 1/2″
- WLL (lbs)
- 3,600
- B (mm)
- 33.3
- C (mm)
- 38.1
- K (mm)
- 19
- M (mm)
- 16
- N (mm)
- 33.3
- P (mm)
- 12.7
- R (mm)
- 114.3
- Weight (lbs)
- 1.34
- Indus part no.IH-LR-RL-JES-062
- Size
- 5/8″
- WLL (lbs)
- 5,200
- B (mm)
- 39.6
- C (mm)
- 44.4
- K (mm)
- 23.9
- M (mm)
- 19
- N (mm)
- 38.1
- P (mm)
- 16
- R (mm)
- 134.9
- Weight (lbs)
- 2.48
- Indus part no.IH-LR-RL-JES-075
- Size
- 3/4″
- WLL (lbs)
- 7,200
- B (mm)
- 44.4
- C (mm)
- 50.8
- K (mm)
- 28.7
- M (mm)
- 22.4
- N (mm)
- 44.4
- P (mm)
- 19
- R (mm)
- 153.9
- Weight (lbs)
- 3.88
- Indus part no.IH-LR-RL-JES-088
- Size
- 7/8″
- WLL (lbs)
- 10,000
- B (mm)
- 52.3
- C (mm)
- 57.1
- K (mm)
- 30.2
- M (mm)
- 25.4
- N (mm)
- 52.3
- P (mm)
- 22.4
- R (mm)
- 177.8
- Weight (lbs)
- 5.87
- Indus part no.IH-LR-RL-JES-100
- Size
- 1″
- WLL (lbs)
- 12,500
- B (mm)
- 58.7
- C (mm)
- 63.5
- K (mm)
- 44.4
- M (mm)
- 28.7
- N (mm)
- 71.4
- P (mm)
- 28.7
- R (mm)
- 217.4
- Weight (lbs)
- 9.84
Show all 10 sizesShow fewer sizes
- Indus part no.IH-LR-RL-JES-125
- Size
- 1-1/4″
- WLL (lbs)
- 18,000
- B (mm)
- 68.3
- C (mm)
- 79.5
- K (mm)
- 52.3
- M (mm)
- 38.1
- N (mm)
- 71.4
- P (mm)
- 35.1
- R (mm)
- 239.8
- Weight (lbs)
- 15.75
- Indus part no.IH-LR-RL-JES-150
- Size
- 1-1/2″
- WLL (lbs)
- 45,200
- B (mm)
- 106.4
- C (mm)
- 101.6
- K (mm)
- 73.2
- M (mm)
- 57.1
- N (mm)
- 112.8
- P (mm)
- 57.1
- R (mm)
- 374.4
- Weight (lbs)
- 54.75
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. N — Dimension N on the manufacturer dimension drawing. P — Dimension P on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the jaw end swivel and what sizes does it come in?▾
How do I read the Indus part number on the jaw end swivel?▾
Which sizes of the jaw end swivel are listed, and what do they weigh?▾
How do I choose the right size of jaw end swivel?▾
What working load limit does the jaw end swivel have?▾
What is the jaw end swivel made of, and how is it finished?▾
Which standard or certificate applies to the jaw end swivel?▾
What does the jaw end swivel connect to?▾
How should the jaw end swivel be inspected before use?▾
Where is the jaw end swivel used?▾
jaw end swivel compared with the regular swivel eye and eye?▾
Do you stock the jaw end swivel, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








