Regular Swivel — Eye and Eye
Regular Swivel, in 11 sizes, 1/4″ to 1-1/2″. Load rating on request. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Regular Swivel
- Size range: 1/4″ to 1-1/2″
- Size range
- 1/4″ to 1-1/2″
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting.
Sizes
11 sizes, 1/4″ to 1-1/2″. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Manufacturer's data
- Minimum ultimate load is 5 times the working load limit (a 5:1 design factor).
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Regular Swivel |
| Sizes | 11 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 1-1/2″ |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
11 sizes| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | R (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|
| IH-LR-RL-RS-025 | 1/4″ | 31.8 | 29.6 | 19 | 27 | 74.6 | 0.21 |
| IH-LR-RL-RS-031 | 5/16″ | 41.3 | 20.6 | 25.4 | 31.8 | 90.5 | 0.39 |
| IH-LR-RL-RS-038 | 3/8″ | 50.8 | 23.8 | 31.8 | 38.1 | 109.5 | 0.75 |
| IH-LR-RL-RS-050 | 1/2″ | 63.5 | 33.3 | 38.1 | 50.8 | 138.1 | 1.43 |
| IH-LR-RL-RS-062 | 5/8″ | 76.2 | 39.7 | 44.4 | 60.3 | 166.7 | 2.5 |
| IH-LR-RL-RS-075 | 3/4″ | 88.9 | 44.4 | 50.8 | 66.7 | 182.6 | 4.13 |
| IH-LR-RL-RS-088 | 7/8″ | 101.6 | 52.4 | 57.1 | 77.8 | 212.7 | 6.25 |
| IH-LR-RL-RS-100 | 1″ | 114.3 | 58.7 | 63.5 | 88.9 | 244.5 | 9 |
| IH-LR-RL-RS-112 | 1-1/8″ | 127 | 60.3 | 69.8 | 95.2 | 183.4 | 11 |
| IH-LR-RL-RS-125 | 1-1/4″ | 142.9 | 68.3 | 79.4 | 68.3 | 282.6 | 16.37 |
| IH-LR-RL-RS-150 | 1-1/2″ | 177.8 | 106.4 | 101.6 | 106.4 | 435 | 49.06 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the regular swivel come in?▾
Can a swivel rotate under load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Double Ring
Stainless Steel D Ring
Stainless Steel Chain Swivel — Eye and Jaw
Stainless Steel Chain Swivel — G-401 Pattern
Stainless Steel Drop Forged Master Link
Stainless Steel D Ring Thimble
Stainless Steel Ezi Hold Dee Ring
