Shoulder Machinery Eye Bolt — 650–24,000 lbs WLL

Shoulder Machinery Eye Bolt, in 10 sizes, 1/4″ × 1″ to 1-1/2″ × 3-1/2″, WLL 650 to 24,000 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Shoulder Machinery Eye Bolt
- Size range: 1/4″ × 1″ to 1-1/2″ × 3-1/2″
- Working load limit: 650 to 24,000 lbs
- Size range
- 1/4″ × 1″ to 1-1/2″ × 3-1/2″
- Working load limit
- 650 to 24,000 lbs
- Material
- Forged carbon steel
- Finish
- Self colour or hot-dip galvanized
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Forged carbon steel, self colour or hot-dip galvanized.
Sizes and ratings
10 sizes, 1/4″ × 1″ to 1-1/2″ × 3-1/2″. Working load limit 650 to 24,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Shoulder Machinery Eye Bolt |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ × 1″ to 1-1/2″ × 3-1/2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 650 to 24,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Forged carbon steel |
| Finish | Self colour or hot-dip galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
10 sizes- Indus part no.IH-LR-EB-MACH-025X100
- Size
- 1/4″ × 1″
- WLL (lbs)
- 650
- Thread length (mm)
- 25.4
- Eye I.D. (mm)
- 22.4
- Weight (lbs/100 pcs)
- 3.2
- Indus part no.IH-LR-EB-MACH-031X112
- Size
- 5/16″ × 1-1/8″
- WLL (lbs)
- 1,200
- Thread length (mm)
- 28.7
- Eye I.D. (mm)
- 28.4
- Weight (lbs/100 pcs)
- 6.2
- Indus part no.IH-LR-EB-MACH-038X125
- Size
- 3/8″ × 1-1/4″
- WLL (lbs)
- 1,550
- Thread length (mm)
- 31.8
- Eye I.D. (mm)
- 35.1
- Weight (lbs/100 pcs)
- 12.5
- Indus part no.IH-LR-EB-MACH-050X150
- Size
- 1/2″ × 1-1/2″
- WLL (lbs)
- 2,600
- Thread length (mm)
- 38.1
- Eye I.D. (mm)
- 44.4
- Weight (lbs/100 pcs)
- 25
- Indus part no.IH-LR-EB-MACH-062X175
- Size
- 5/8″ × 1-3/4″
- WLL (lbs)
- 5,200
- Thread length (mm)
- 44.4
- Eye I.D. (mm)
- 57.1
- Weight (lbs/100 pcs)
- 50
- Indus part no.IH-LR-EB-MACH-075X200
- Size
- 3/4″ × 2″
- WLL (lbs)
- 7,200
- Thread length (mm)
- 50.8
- Eye I.D. (mm)
- 69.8
- Weight (lbs/100 pcs)
- 87.5
- Indus part no.IH-LR-EB-MACH-088X225
- Size
- 7/8″ × 2-1/4″
- WLL (lbs)
- 10,600
- Thread length (mm)
- 57.1
- Eye I.D. (mm)
- 82.5
- Weight (lbs/100 pcs)
- 150
- Indus part no.IH-LR-EB-MACH-100X250
- Size
- 1″ × 2-1/2″
- WLL (lbs)
- 13,300
- Thread length (mm)
- 63.5
- Eye I.D. (mm)
- 95.2
- Weight (lbs/100 pcs)
- 218
Show all 10 sizesShow fewer sizes
- Indus part no.IH-LR-EB-MACH-125X300
- Size
- 1-1/4″ × 3″
- WLL (lbs)
- 21,000
- Thread length (mm)
- 76.2
- Eye I.D. (mm)
- 114.3
- Weight (lbs/100 pcs)
- 380
- Indus part no.IH-LR-EB-MACH-150X350
- Size
- 1-1/2″ × 3-1/2″
- WLL (lbs)
- 24,000
- Thread length (mm)
- 88.9
- Eye I.D. (mm)
- 139.7
- Weight (lbs/100 pcs)
- 700
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Thread length — Length of the threaded shank. Eye I.D. — Inside diameter of the eye. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Shoulder Machinery Eye Bolt and what is it used for?▾
How are the Indus part numbers for the Shoulder Machinery Eye Bolt structured?▾
What sizes does the Shoulder Machinery Eye Bolt come in?▾
How do I choose the right size of Shoulder Machinery Eye Bolt?▾
What is the working load limit of the Shoulder Machinery Eye Bolt?▾
What is the Shoulder Machinery Eye Bolt made from?▾
Does the Shoulder Machinery Eye Bolt come with a test certificate?▾
What should the Shoulder Machinery Eye Bolt be used with?▾
How should the Shoulder Machinery Eye Bolt be inspected and used safely?▾
Where is the Shoulder Machinery Eye Bolt typically used?▾
How does the Shoulder Machinery Eye Bolt differ from the Shoulder Nut Eye Bolt, Hot-Dip Galvanized?▾
Do you stock the Shoulder Machinery Eye Bolt in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Eye bolt types and angled loads: plain, shoulder and DIN 580 collar eye bolts
A plain eye bolt is rated for a straight pull only. A shoulder eye bolt pulled at 45° keeps 30% of its rating. A DIN 580 collar eye bolt has its own table for angled loads and none at all for a pull across the eye. Here is how each type is rated, fitted and derated.
8 min read
Rigging capacity charts
Eye bolt capacity chart: DIN 580, BS 4278, JIS and US eye bolts by thread size
Eye bolt working load limits by thread: DIN 580 and DIN 582 from M8 to M100 with angled ratings, BS 4278 and JIS B 1168 collar eye bolts, US shoulder and machinery eye bolts at 0°, 15°, 30°, 45° and 90°, and eye nuts — with the fitting rules every rating assumes.
7 min read








