Skip to content

Marine

226 SKUs1 brands

Showing 145–192 of 226 SKUs

Stainless Steel Rope Cleat — dimension drawing

Stainless Steel Rope Cleat

Stainless steel2-1/2″ to 6″
Inquire
Stainless Steel Boat Cleat — dimension drawing, two-hole, low flat 2A

Stainless Steel Boat Cleat

M4 to M8Stainless steel AISI316
Inquire
Stag Horn Type Bollard — dimension drawing

Stag Horn Type Bollard

10 to 200 tCast steel
Inquire
Single Bitt Bollard — dimension drawing

Single Bitt Bollard

20 to 200 tCast steel
Inquire
R Type Dock Bollard — dimension drawing

R Type Dock Bollard

10 to 200 t10 t to 200 t
Inquire
K Head Dock Bollard — dimension drawing

K Head Dock Bollard

15 to 200 t15 t to 200 t
Inquire
J Type Dock Bollard — dimension drawing

J Type Dock Bollard

10 t to 50 t10 to 50 t
Inquire
CVI Bollard — dimension drawing

CVI Bollard

10 to 200 tCasting steel
Inquire
Studless Anchor Chain — Grades U1, U2 and U3 — dimension drawing

Studless Anchor Chain — Grades U1, U2 and U3

Hot-dip galvanized, black bitumen coatingLow carbon alloy steel
Inquire
Stud Link Anchor Chain — Grades U1, U2 and U3 — dimension drawing

Stud Link Anchor Chain — Grades U1, U2 and U3

Hot-dip galvanized, black bitumen coatingLow carbon alloy steel
Inquire
Black end shackle, D type, for anchor chain grades U2 and U3

End Shackle, D Type — Grades U2 and U3

Steel CM490/CM69011 mm to 162 mm
Inquire

Questions we get asked

About this range

01What is the difference between proof load and breaking load on chain?
Both are test loads set by the classification society. Every length is proof-loaded at the factory; breaking tests are made on samples. Neither is a working load: anchoring equipment is sized from the vessel's equipment number, and a mooring is designed with a safety factor on the breaking load.
02What is a shot of chain?
A standard length of anchor chain cable: 27.5 m, or 15 fathoms. Anchor chain is ordered by the number of shots, joined by Kenter or D-type joining shackles.
03Stud link or studless?
Stud link chain is standard for ship anchor cables and for many offshore moorings; the stud keeps the link from deforming and the chain from kinking. Studless chain is lighter for the same diameter and is used for long-term offshore moorings and smaller vessels.
04How do I read an Indus marine part number?
IH-MR, then the shelf, then the family, then the size. Chain sizes are the diameter in tenths of a millimetre (0760 is 76 mm); anchors are their mass in kilograms. Families that were already live keep their IH-LR numbers.
05What types of marine anchor do you supply?
Ship anchors include Hall, Baldt, Pool, Admiralty, Danforth and HHP types. Small-boat anchors include Bruce, plough, delta and grapnel, galvanized and stainless.
06How is marine anchor chain sized?
Anchor chain and mooring chain are sized by chain diameter and grade. The range also covers the fittings, anchors and deck gear that go with them. Send your chain size and grade for a quote.
07What does the marine equipment range cover?
It covers mooring and deck equipment, anchors, anchor chain and fittings, and ship maintenance chemicals such as rust remover and penetrating oil. Indus supplies it from Dubai, UAE.