J-Lock Chaser — Single Chain Grabber

J-Lock Chaser, in 2 sizes. Indus part numbers.
Key features
- Product type: J-Lock Chaser
- Size range: 110 t WLL to 250 t WLL
- Working load limit: 110–250 t
Product description
J-lock chaser that grabs and holds a single chain link.
Sizes
2 sizes, from 110 t WLL to 250 t WLL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the SWL and the chain or wire size the tool works on.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | J-Lock Chaser |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 110 t WLL to 250 t WLL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 110–250 t |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-MR-AH-JLC-110T
- Size
- 110 t WLL
- WLL (t)
- 110
- Proof load (t)
- 250
- A (mm)
- 2,087
- B (mm)
- 1,702
- C (mm)
- 1,105
- D (mm)
- 406
- E (mm)
- 121
- F (mm)
- 254
- G (mm)
- 261
- H (mm)
- 92
- I (mm)
- 762
- J (mm)
- 86
- K (mm)
- 127
- Indus part no.IH-MR-AH-JLC-250T
- Size
- 250 t WLL
- WLL (t)
- 250
- Proof load (t)
- 400
- A (mm)
- 2,616
- B (mm)
- 1,575
- C (mm)
- 1,041
- D (mm)
- 530
- E (mm)
- 175
- F (mm)
- 330
- G (mm)
- 381
- H (mm)
- 130
- I (mm)
- 762
- J (mm)
- 132
- K (mm)
- 165
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. I — Dimension I on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is J-Lock Chaser, Single Chain Grabber used for?▾
What sizes does J-Lock Chaser, Single Chain Grabber come in?▾
How do I choose the right size of J-Lock Chaser, Single Chain Grabber?▾
What SWL does J-Lock Chaser, Single Chain Grabber have?▾
What material and finish is J-Lock Chaser, Single Chain Grabber supplied in?▾
What standard and documents apply to J-Lock Chaser, Single Chain Grabber?▾
What does J-Lock Chaser, Single Chain Grabber connect to or work with?▾
How should J-Lock Chaser, Single Chain Grabber be inspected and looked after?▾
What job is J-Lock Chaser, Single Chain Grabber used for?▾
How does J-Lock Chaser, Single Chain Grabber differ from J-Chaser?▾
How are J-Lock Chaser, Single Chain Grabber shipped, and can they be exported from Dubai?▾
Do you keep J-Lock Chaser, Single Chain Grabber in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






