J-Chaser

J-Chaser, in 4 sizes. Indus part numbers.
Key features
- Product type: J-Chaser
- Size range: 110 t SWL to 250 t SWL
- Working load limit: 110–250 t
Product description
J-chaser for running down an anchor line to recover the anchor.
Sizes
4 sizes, from 110 t SWL to 250 t SWL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the SWL and the chain or wire size the tool works on.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | J-Chaser |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 110 t SWL to 250 t SWL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 110–250 t |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-MR-AH-JCH-110T
- Size
- 110 t SWL
- WLL (t)
- 110
- A (mm)
- 1,702
- B (mm)
- 546
- C (mm)
- 121
- D (mm)
- 99
- E (mm)
- 146
- F (mm)
- 762
- G (mm)
- 845
- H (mm)
- 178
- I (mm)
- 430
- J (mm)
- 305
- Indus part no.IH-MR-AH-JCH-130T
- Size
- 130 t SWL
- WLL (t)
- 130
- A (mm)
- 1,702
- B (mm)
- 546
- C (mm)
- 121
- D (mm)
- 99
- E (mm)
- 146
- F (mm)
- 762
- G (mm)
- 845
- H (mm)
- 178
- I (mm)
- 430
- J (mm)
- 305
- Indus part no.IH-MR-AH-JCH-150T
- Size
- 150 t SWL
- WLL (t)
- 150
- A (mm)
- 1,828
- B (mm)
- 584
- C (mm)
- 130
- D (mm)
- 102
- E (mm)
- 146
- F (mm)
- 822
- G (mm)
- 914
- H (mm)
- 178
- I (mm)
- 460
- J (mm)
- 330
- Indus part no.IH-MR-AH-JCH-250T
- Size
- 250 t SWL
- WLL (t)
- 250
- A (mm)
- 1,575
- B (mm)
- 546
- C (mm)
- 175
- D (mm)
- 132
- E (mm)
- 175
- F (mm)
- 762
- G (mm)
- 845
- H (mm)
- 203
- I (mm)
- 430
- J (mm)
- 330
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. I — Dimension I on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is J-Chaser used for?▾
How do I read an Indus part number for J-Chaser, such as IH-MR-AH-JCH-110T?▾
What sizes does J-Chaser come in?▾
How do I choose the right size of J-Chaser?▾
What SWL does J-Chaser have?▾
What material and finish is J-Chaser supplied in?▾
What standard and documents apply to J-Chaser?▾
What does J-Chaser connect to or work with?▾
How should J-Chaser be inspected and looked after?▾
How does J-Chaser differ from Permanent Chaser?▾
How are J-Chaser shipped, and can they be exported from Dubai?▾
Do you keep J-Chaser in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






