Skip to content

Marine

226 SKUs1 brands

Showing 97–144 of 226 SKUs

Questions we get asked

About this range

01What is the difference between proof load and breaking load on chain?
Both are test loads set by the classification society. Every length is proof-loaded at the factory; breaking tests are made on samples. Neither is a working load: anchoring equipment is sized from the vessel's equipment number, and a mooring is designed with a safety factor on the breaking load.
02What is a shot of chain?
A standard length of anchor chain cable: 27.5 m, or 15 fathoms. Anchor chain is ordered by the number of shots, joined by Kenter or D-type joining shackles.
03Stud link or studless?
Stud link chain is standard for ship anchor cables and for many offshore moorings; the stud keeps the link from deforming and the chain from kinking. Studless chain is lighter for the same diameter and is used for long-term offshore moorings and smaller vessels.
04How do I read an Indus marine part number?
IH-MR, then the shelf, then the family, then the size. Chain sizes are the diameter in tenths of a millimetre (0760 is 76 mm); anchors are their mass in kilograms. Families that were already live keep their IH-LR numbers.
05What types of marine anchor do you supply?
Ship anchors include Hall, Baldt, Pool, Admiralty, Danforth and HHP types. Small-boat anchors include Bruce, plough, delta and grapnel, galvanized and stainless.
06How is marine anchor chain sized?
Anchor chain and mooring chain are sized by chain diameter and grade. The range also covers the fittings, anchors and deck gear that go with them. Send your chain size and grade for a quote.
07What does the marine equipment range cover?
It covers mooring and deck equipment, anchors, anchor chain and fittings, and ship maintenance chemicals such as rust remover and penetrating oil. Indus supplies it from Dubai, UAE.