Zinc Anode for Stud Link Anchor Chain

Zinc Anode for Stud Link Anchor Chain. Indus part number.
Key features
- Product type: Zinc Anode for Stud Link Anchor Chain
- Size range: 122.2 × 100 × 42.6 mm per half, 1.5 kg per half
Product description
Zinc sacrificial anode that clamps over a stud link for cathodic protection of the chain.
Configuration
Supplied as one configuration: 122.2 × 100 × 42.6 mm per half, 1.5 kg per half. Its Indus part number is in the table below.
No load rating is published for this item. We confirm the rating with the quotation; do not load it until you have that rating in writing.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Zinc Anode for Stud Link Anchor Chain |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 122.2 × 100 × 42.6 mm per half, 1.5 kg per half |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-MR-AC-ANZ-122X100
- Size
- 122.2 × 100 × 42.6 mm per half, 1.5 kg per half
- Outside width (mm)
- 100
- Overall length (mm)
- 122.2
- Height (mm)
- 42.6
Size — Nominal size as the manufacturer states it. Outside width — Outside width of the link. Overall length — Overall length. Height — Overall height, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Zinc Anode for Stud Link Anchor Chain used for?▾
What size does Zinc Anode for Stud Link Anchor Chain come in?▾
How do I choose the right size of Zinc Anode for Stud Link Anchor Chain?▾
What load rating does Zinc Anode for Stud Link Anchor Chain have?▾
What material and finish is Zinc Anode for Stud Link Anchor Chain supplied in?▾
What standard and certificate apply to Zinc Anode for Stud Link Anchor Chain?▾
What does Zinc Anode for Stud Link Anchor Chain connect to or work with?▾
How should Zinc Anode for Stud Link Anchor Chain be inspected and looked after?▾
Where is Zinc Anode for Stud Link Anchor Chain used in a chain cable or mooring line?▾
How does Zinc Anode for Stud Link Anchor Chain differ from End Link — Stud Link Anchor Chain, Grades U2 and U3?▾
How are Zinc Anode for Stud Link Anchor Chain shipped, and can they be exported from Dubai?▾
Do you keep Zinc Anode for Stud Link Anchor Chain in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read
Anchor chain & mooring
Anchor chain testing: proof load, breaking load, mechanical tests and NDT
Before a length of anchor chain is certified it is proof loaded end to end, sampled for a break test, tested for strength and toughness, and — for offshore chain — examined link by link. What each test is, how samples are chosen, what counts as a pass, and the separate rules for shackles, swivels and links.
4 min read
Anchor chain & mooring
Kenter shackle: how to dismantle and assemble one, and why it is sealed with lead
The Kenter shackle joins lengths of anchor chain without changing the shape of the cable. Its parts, how to take one apart with a punch and hammer, how to put it back together and seal the taper pin with a new lead plug, which lead plug fits which chain size, and the checks before it goes back over the windlass.
4 min read








