Stainless Steel Straight Chock

Stainless Steel Straight Chock, in 3 sizes. Indus part numbers.
Key features
- Product type: Stainless Steel Straight Chock
- Material
- Stainless steel
- Finish
- Polished
Product description
Bollards, cleats, fairleads and mooring springs for vessels, docks and jetties. Stainless steel, polished.
Sizes
3 sizes. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Casting.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Straight Chock |
| Sizes | 3 |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-BM-SSSC-NOP10
- Size
- No.10
- B (mm)
- 20
- H (mm)
- 24
- L (mm)
- 100
- Indus part no.IH-LR-BM-SSSC-NOP10-2
- Size
- No.10
- B (mm)
- 20
- H (mm)
- 24
- L (mm)
- 127
- Indus part no.IH-LR-BM-SSSC-NOP10-3
- Size
- No.10
- B (mm)
- 24
- H (mm)
- 36
- L (mm)
- 152
Size — Nominal size as the manufacturer states it. B — Dimension B on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Stainless Steel Straight Chock used for?▾
How do I read an Indus part number for Stainless Steel Straight Chock, such as IH-LR-BM-SSSC-NOP10?▾
What sizes does Stainless Steel Straight Chock come in?▾
What load rating does Stainless Steel Straight Chock have?▾
What is Stainless Steel Straight Chock made from, and what finish does it have?▾
What standard and documents apply to Stainless Steel Straight Chock?▾
What does Stainless Steel Straight Chock connect to or work with?▾
How should Stainless Steel Straight Chock be inspected and looked after?▾
What do I need to send to get a quotation for Stainless Steel Straight Chock?▾
How does Stainless Steel Straight Chock differ from Stainless Steel Boat Cleat?▾
How are Stainless Steel Straight Chock shipped, and can they be exported from Dubai?▾
Do you keep Stainless Steel Straight Chock in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Types of mooring bollards: ship double bollards, cross bollards, dock bollards and cleats
A bollard on a ship's deck and a bollard on a quay do the same job under different rules. The bollard types we list — double, cross, T-head, stag horn, bitts and cleats — how they are rated, and what to check before fitting one.
6 min read
Lifting & rigging
Types of marine fenders: cone, cell, arch, cylindrical, pneumatic and foam
A fender turns a berthing ship's energy into a reaction force the hull and the quay can take. The main fender types, where each is used, the sizes we list and the two numbers that decide the choice.
5 min read
Lifting & rigging
Fibre rope materials compared: polypropylene, polyethylene, polyester, nylon and HMPE
At the same diameter, an HMPE rope on our listings breaks at about four times the load of a polyolefin or nylon rope. How the five fibre rope materials differ in strength, stretch, buoyancy and weathering, and how to read an ISO or MEG4 breaking load.
5 min read








