Four-Prong Grapnel

Four-Prong Grapnel, in 3 sizes. Indus part numbers.
Key features
- Product type: Four-Prong Grapnel
- Size range: 130 t WLL to 250 t WLL
- Working load limit: 130–250 t
Product description
Four-prong grapnel for recovering chain and wire.
Sizes
3 sizes, from 130 t WLL to 250 t WLL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the SWL and the chain or wire size the tool works on.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Four-Prong Grapnel |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 130 t WLL to 250 t WLL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 130–250 t |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-MR-AH-GRP-130T
- Size
- 130 t WLL
- WLL (t)
- 130
- Proof load (t)
- 250
- A (mm)
- 2,153
- B (mm)
- 1,537
- C (mm)
- 1,422
- D (mm)
- 483
- E (mm)
- 102
- F (mm)
- 124
- Ø1 (mm)
- 203
- Ø2 (mm)
- 99
- Indus part no.IH-MR-AH-GRP-150T
- Size
- 150 t WLL
- WLL (t)
- 150
- Proof load (t)
- 250
- A (mm)
- 2,153
- B (mm)
- 1,537
- C (mm)
- 1,422
- D (mm)
- 483
- E (mm)
- 102
- F (mm)
- 130
- Ø1 (mm)
- 230
- Ø2 (mm)
- 102
- Indus part no.IH-MR-AH-GRP-250T
- Size
- 250 t WLL
- WLL (t)
- 250
- Proof load (t)
- 350
- A (mm)
- 2,153
- B (mm)
- 1,537
- C (mm)
- 1,430
- D (mm)
- 483
- E (mm)
- 107
- F (mm)
- 172
- Ø1 (mm)
- 330
- Ø2 (mm)
- 132
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. Ø1 — Dimension Ø1 on the manufacturer dimension drawing. Ø2 — Dimension Ø2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Four-Prong Grapnel used for?▾
How do I read an Indus part number for Four-Prong Grapnel, such as IH-MR-AH-GRP-130T?▾
What sizes does Four-Prong Grapnel come in?▾
How do I choose the right size of Four-Prong Grapnel?▾
What SWL does Four-Prong Grapnel have?▾
What material and finish is Four-Prong Grapnel supplied in?▾
What standard and documents apply to Four-Prong Grapnel?▾
What does Four-Prong Grapnel connect to or work with?▾
How should Four-Prong Grapnel be inspected and looked after?▾
How does Four-Prong Grapnel differ from J-Lock Chaser — Single Chain Grabber?▾
How are Four-Prong Grapnel shipped, and can they be exported from Dubai?▾
Do you keep Four-Prong Grapnel in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






