Anchor Line Hook

Anchor Line Hook, in 6 sizes. Indus part numbers.
Key features
- Product type: Anchor Line Hook
- Size range: 15 t SWL to 80 t SWL
- Working load limit: 15–80 t
Product description
Anchor line hook for recovering a mooring line from the seabed.
Sizes
6 sizes, from 15 t SWL to 80 t SWL. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the SWL and the chain or wire size the tool works on.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Anchor Line Hook |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 15 t SWL to 80 t SWL |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 15–80 t |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-MR-AH-ALH-15T
- Size
- 15 t SWL
- WLL (t)
- 15
- Proof load (t)
- 30
- Min breaking load (t)
- 60
- A (mm)
- 38
- B (mm)
- 72
- C (mm)
- 337
- D (mm)
- 32
- E (mm)
- 55
- Indus part no.IH-MR-AH-ALH-20T
- Size
- 20 t SWL
- WLL (t)
- 20
- Proof load (t)
- 40
- Min breaking load (t)
- 80
- A (mm)
- 40
- B (mm)
- 74
- C (mm)
- 343
- D (mm)
- 32
- E (mm)
- 60
- Indus part no.IH-MR-AH-ALH-25T
- Size
- 25 t SWL
- WLL (t)
- 25
- Proof load (t)
- 50
- Min breaking load (t)
- 100
- A (mm)
- 52
- B (mm)
- 86
- C (mm)
- 440
- D (mm)
- 38
- E (mm)
- 65
- Indus part no.IH-MR-AH-ALH-30T
- Size
- 30 t SWL
- WLL (t)
- 30
- Proof load (t)
- 60
- Min breaking load (t)
- 120
- A (mm)
- 62
- B (mm)
- 95
- C (mm)
- 480
- D (mm)
- 40
- E (mm)
- 70
- Indus part no.IH-MR-AH-ALH-50T
- Size
- 50 t SWL
- WLL (t)
- 50
- Proof load (t)
- 100
- Min breaking load (t)
- 200
- A (mm)
- 80
- B (mm)
- 112
- C (mm)
- 618
- D (mm)
- 45
- E (mm)
- 90
- Indus part no.IH-MR-AH-ALH-80T
- Size
- 80 t SWL
- WLL (t)
- 80
- Proof load (t)
- 160
- Min breaking load (t)
- 320
- A (mm)
- 90
- B (mm)
- 130
- C (mm)
- 709
- D (mm)
- 62
- E (mm)
- 100
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Anchor Line Hook used for?▾
How do I read an Indus part number for Anchor Line Hook, such as IH-MR-AH-ALH-15T?▾
What sizes does Anchor Line Hook come in?▾
How do I choose the right size of Anchor Line Hook?▾
What SWL does Anchor Line Hook have?▾
What material and finish is Anchor Line Hook supplied in?▾
What standard and documents apply to Anchor Line Hook?▾
What does Anchor Line Hook connect to or work with?▾
How should Anchor Line Hook be inspected and looked after?▾
How does Anchor Line Hook differ from J-Lock Chaser — Single Chain Grabber?▾
How are Anchor Line Hook shipped, and can they be exported from Dubai?▾
Do you keep Anchor Line Hook in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






