R Type Dock Bollard
R Type Dock Bollard, in 10 sizes, 10 t to 200 t. Indus part numbers.
Key features
- Product type: R Type Dock Bollard
- Size range: 10 t to 200 t
- Working load limit: 10 to 200 t
- Size range
- 10 t to 200 t
- Working load limit
- 10 to 200 t
- Material
- Cast steel
Product description
Bollards, cleats, fairleads and mooring springs for vessels, docks and jetties. Cast steel.
Sizes and ratings
10 sizes, 10 t to 200 t. Working load limit 10 to 200 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Choosing a size
Choose on the safe working load of the lines and the standard the vessel or berth is built to; the rating assumes structure that can carry it.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | R Type Dock Bollard |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 10 t to 200 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 10 to 200 t |
Construction
| Parameter | Value |
|---|---|
| Material | Cast steel |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Size | WLL (t) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | H (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-BM-RDB-10T | 10 t | 10 | 200 | 216 | 236 | 160 | 106 | 218 | 120 | 32 |
| IH-LR-BM-RDB-25T | 25 t | 25 | 245 | 350 | 305 | 250 | 150 | 285 | 127 | 45 |
| IH-LR-BM-RDB-30T | 30 t | 30 | 290 | 430 | 410 | 360 | 190 | 360 | 150 | 45 |
| IH-LR-BM-RDB-50T | 50 t | 50 | 365 | 550 | 540 | 430 | 250 | 475 | 200 | 50 |
| IH-LR-BM-RDB-75T | 75 t | 75 | 430 | 650 | 650 | 520 | 300 | 570 | 235 | 70 |
| IH-LR-BM-RDB-80T | 80 t | 80 | 415 | 518 | 540 | 430 | 250 | 430 | 245 | 55 |
| IH-LR-BM-RDB-120T | 120 t | 120 | 490 | 678 | 642 | 600 | 330 | 584 | 290 | 65 |
| IH-LR-BM-RDB-200T | 200 t | 200 | 520 | 950 | 780 | 680 | 360 | 670 | 306 | 80 |
| IH-LR-BM-RDB-200T-2 | 200 t | 200 | 600 | 950 | 780 | 680 | 360 | 670 | 386 | 80 |
| IH-LR-BM-RDB-200T-3 | 200 t | 200 | 656 | 1,020 | 930 | 800 | 460 | 830 | 349 | 100 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the r type dock bollard come in?▾
What is the working load limit?▾
What does the nominal size of a marine bollard mean?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Single Bitt Bollard
Stag Horn Type Bollard
Stainless Steel Boat Cleat
Stainless Steel Bow Roller
Stainless Steel Mooring Cleat Blue Water Cleat Deck Hardware
Stainless Steel Rope Cleat
Stainless Steel Straight Chock
