Stainless Steel Boat Cleat
Stainless Steel Boat Cleat, in 10 sizes, M4 to M8. Indus part numbers.
Key features
- Product type: Stainless Steel Boat Cleat
- Size range: M4 to M8
- Size range
- M4 to M8
- Material
- Stainless steel AISI316
- Finish
- Polished
Product description
Bollards, cleats, fairleads and mooring springs for vessels, docks and jetties. Stainless steel AISI316, polished.
Sizes
10 sizes, M4 to M8. Available as: two-hole, low flat 2A, four-hole 4A. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Casting.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Boat Cleat |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M4 to M8 |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel AISI316 |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Size | Type | B (mm) | B1 (mm) | H (mm) | L (mm) | L1 (mm) | L2 (mm) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-BM-SSBC-M4-TLF2A | M4 | Two-hole, low flat 2A | 14 | 15 | — | 100 | 30 | — |
| IH-LR-BM-SSBC-M4-TLF2A-2 | M4 | Two-hole, low flat 2A | 16 | 17.5 | — | 125 | 35 | — |
| IH-LR-BM-SSBC-M5-TLF2A | M5 | Two-hole, low flat 2A | 19 | 21 | — | 150 | 45 | — |
| IH-LR-BM-SSBC-M6-TLF2A | M6 | Two-hole, low flat 2A | 22 | 24 | — | 200 | 55 | — |
| IH-LR-BM-SSBC-M8-TLF2A | M8 | Two-hole, low flat 2A | 25 | 27 | — | 250 | 70 | — |
| IH-LR-BM-SSBC-M5-F4A | M5 | Four-hole 4A | — | — | 150 | 100 | 30 | 26 |
| IH-LR-BM-SSBC-M5-F4A-2 | M5 | Four-hole 4A | — | — | 175 | 125 | 40 | 30 |
| IH-LR-BM-SSBC-M6-F4A | M6 | Four-hole 4A | — | — | 200 | 150 | 50 | 40 |
| IH-LR-BM-SSBC-M6-F4A-2 | M6 | Four-hole 4A | — | — | 250 | 200 | 55 | 42 |
| IH-LR-BM-SSBC-M8-F4A | M8 | Four-hole 4A | — | — | 300 | 250 | 60 | 45 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. B — Dimension B on the manufacturer dimension drawing. B1 — Dimension B1 on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel boat cleat come in?▾
What does the nominal size of a marine bollard mean?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Bow Roller
Stainless Steel Mooring Cleat Blue Water Cleat Deck Hardware
Stainless Steel Rope Cleat
Stainless Steel Straight Chock
Stainless Steel Skene Type Fairlead
Twin Horn Bollard
T Head Dock Bollard
