End Link — Stud Link Anchor Chain, Grades U2 and U3

End Link, in 56 sizes. Indus part numbers.
Key features
- Product type: End Link
- Pattern / standard: IACS UR W18
- Size range: 1/2″ (12.5 mm) to 6-3/8″ (162 mm)
Product description
Studless end link that takes the shackle at each end of a stud link anchor chain length.
Sizes
56 sizes, from 1/2″ (12.5 mm) to 6-3/8″ (162 mm). Every size has its own Indus part number in the table below.
Proof and breaking loads are those of the chain grade the fitting is made for, as IACS UR W18 requires of anchor chain accessories.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | End Link |
| Pattern / standard | IACS UR W18 |
| Sizes | 56 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/2″ (12.5 mm) to 6-3/8″ (162 mm) |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 92–12,160 kN |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
56 sizes- Indus part no.IH-MR-AC-END-0125
- Size
- 1/2″ (12.5 mm)
- Proof load, grade U2 (kN)
- 66
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 92
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 0.23
- Indus part no.IH-MR-AC-END-0140
- Size
- 9/16″ (14 mm)
- Proof load, grade U2 (kN)
- 82
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 116
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 0.36
- Indus part no.IH-MR-AC-END-0160
- Size
- 5/8″ (16 mm)
- Proof load, grade U2 (kN)
- 107
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 150
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 0.51
- Indus part no.IH-MR-AC-END-0175
- Size
- 11/16″ (17.5 mm)
- Proof load, grade U2 (kN)
- 127
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 179
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 0.68
- Indus part no.IH-MR-AC-END-0190
- Size
- 3/4″ (19 mm)
- Proof load, grade U2 (kN)
- 150
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 211
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 0.89
- Indus part no.IH-MR-AC-END-0205
- Size
- 13/16″ (20.5 mm)
- Proof load, grade U2 (kN)
- 175
- Proof load, grade U3 (kN)
- 244
- Min breaking load, grade U2 (kN)
- 244
- Min breaking load, grade U3 (kN)
- 349
- Weight (kg)
- 1.13
- Indus part no.IH-MR-AC-END-0220
- Size
- 7/8″ (22 mm)
- Proof load, grade U2 (kN)
- 200
- Proof load, grade U3 (kN)
- 280
- Min breaking load, grade U2 (kN)
- 280
- Min breaking load, grade U3 (kN)
- 401
- Weight (kg)
- 1.28
- Indus part no.IH-MR-AC-END-0240
- Size
- 15/16″ (24 mm)
- Proof load, grade U2 (kN)
- 237
- Proof load, grade U3 (kN)
- 332
- Min breaking load, grade U2 (kN)
- 332
- Min breaking load, grade U3 (kN)
- 476
- Weight (kg)
- 1.77
Show all 56 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Proof load, grade U2 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Proof load, grade U3 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load, grade U2 — Minimum breaking load. A test figure — never lift to it. Min breaking load, grade U3 — Minimum breaking load. A test figure — never lift to it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is End Link, Stud Link Anchor Chain, Grades U2 and U3 used for?▾
How do I read an Indus part number for End Link, Stud Link Anchor Chain, Grades U2 and U3, such as IH-MR-AC-END-0125?▾
What sizes does End Link, Stud Link Anchor Chain, Grades U2 and U3 come in?▾
How do I choose the right size of End Link, Stud Link Anchor Chain, Grades U2 and U3?▾
What load rating does End Link, Stud Link Anchor Chain, Grades U2 and U3 have?▾
What material and finish is End Link, Stud Link Anchor Chain, Grades U2 and U3 supplied in?▾
What standard and certificate apply to End Link, Stud Link Anchor Chain, Grades U2 and U3?▾
What does End Link, Stud Link Anchor Chain, Grades U2 and U3 connect to or work with?▾
How should End Link, Stud Link Anchor Chain, Grades U2 and U3 be inspected and looked after?▾
How does End Link, Stud Link Anchor Chain, Grades U2 and U3 differ from Enlarged Link — Stud Link Anchor Chain, Grades U2 and U3?▾
How are End Link, Stud Link Anchor Chain, Grades U2 and U3 shipped, and can they be exported from Dubai?▾
Do you keep End Link, Stud Link Anchor Chain, Grades U2 and U3 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read
Anchor chain & mooring
Anchor chain wear limits: the 12% rule and when to renew a length
Anchor chain wears where links rub against each other and the windlass. Classification societies allow the mean diameter to fall 12% below nominal before a length must be renewed. The minimum diameter for every size from 12.5 to 162 mm, how to measure, and the other defects that condemn a length.
4 min read
Anchor chain & mooring
Anchor chain testing: proof load, breaking load, mechanical tests and NDT
Before a length of anchor chain is certified it is proof loaded end to end, sampled for a break test, tested for strength and toughness, and — for offshore chain — examined link by link. What each test is, how samples are chosen, what counts as a pass, and the separate rules for shackles, swivels and links.
4 min read








