Stainless Steel Swageless Cone Toggle Terminal — 3–16 mm

Stainless Steel Swageless Cone Toggle Terminal, in 9 sizes, 3 mm to 16 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Swageless Cone Toggle Terminal
- Size range: 3 mm to 16 mm
- Size range
- 3 mm to 16 mm
- Material
- Type 316 stainless steel
- Finish
- Polished
Product description
Spelter sockets and swage or swageless terminals that end a wire rope in an eye, jaw, fork or stud. Type 316 stainless steel, polished.
Sizes
9 sizes, 3 mm to 16 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Machining.
Choosing a size
Match the terminal to the rope diameter and construction, and fit it with the method it is made for — poured, pressed or hand-assembled.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Swageless Cone Toggle Terminal |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 mm to 16 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-LR-ST-SCTTSS-3MM
- Size
- 3 mm
- A (mm)
- 8
- D (mm)
- 6
- L (mm)
- 71
- SW1 (mm)
- 10
- SW2 (mm)
- 12
- Weight (kg/100 pcs)
- 6
- Indus part no.IH-LR-ST-SCTTSS-4MM
- Size
- 4 mm
- A (mm)
- 10
- D (mm)
- 8
- L (mm)
- 90
- SW1 (mm)
- 12
- SW2 (mm)
- 14
- Weight (kg/100 pcs)
- 9
- Indus part no.IH-LR-ST-SCTTSS-5MM
- Size
- 5 mm
- A (mm)
- 12
- D (mm)
- 9
- L (mm)
- 108
- SW1 (mm)
- 14
- SW2 (mm)
- 17
- Weight (kg/100 pcs)
- 18
- Indus part no.IH-LR-ST-SCTTSS-6MM
- Size
- 6 mm
- A (mm)
- 15
- D (mm)
- 12
- L (mm)
- 125
- SW1 (mm)
- 17
- SW2 (mm)
- 19
- Weight (kg/100 pcs)
- 30
- Indus part no.IH-LR-ST-SCTTSS-8MM
- Size
- 8 mm
- A (mm)
- 18
- D (mm)
- 16
- L (mm)
- 148
- SW1 (mm)
- 19
- SW2 (mm)
- 24
- Weight (kg/100 pcs)
- 65
- Indus part no.IH-LR-ST-SCTTSS-10MM
- Size
- 10 mm
- A (mm)
- 20
- D (mm)
- 19
- L (mm)
- 176
- SW1 (mm)
- 24
- SW2 (mm)
- 27
- Weight (kg/100 pcs)
- 80
- Indus part no.IH-LR-ST-SCTTSS-12MM
- Size
- 12 mm
- A (mm)
- 24
- D (mm)
- 19
- L (mm)
- 206
- SW1 (mm)
- 27
- SW2 (mm)
- 32
- Weight (kg/100 pcs)
- 120
- Indus part no.IH-LR-ST-SCTTSS-14MM
- Size
- 14 mm
- A (mm)
- 26
- D (mm)
- 22
- L (mm)
- 230
- SW1 (mm)
- 30
- SW2 (mm)
- 36
- Weight (kg/100 pcs)
- 185
Show all 9 sizesShow fewer sizes
- Indus part no.IH-LR-ST-SCTTSS-16MM
- Size
- 16 mm
- A (mm)
- 29
- D (mm)
- 25
- L (mm)
- 261
- SW1 (mm)
- 32
- SW2 (mm)
- 41
- Weight (kg/100 pcs)
- 260
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. SW1 — Dimension SW1 on the manufacturer dimension drawing. SW2 — Dimension SW2 on the manufacturer dimension drawing. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Swageless Cone Toggle Terminal and where is it used?▾
How do I read Stainless Steel Swageless Cone Toggle Terminal part numbers such as IH-LR-ST-SCTTSS-3MM?▾
Which sizes does the Stainless Steel Swageless Cone Toggle Terminal come in?▾
How do I choose the right size of Stainless Steel Swageless Cone Toggle Terminal?▾
What load rating does the Stainless Steel Swageless Cone Toggle Terminal carry?▾
What is the Stainless Steel Swageless Cone Toggle Terminal made from and how is it finished?▾
Does the Stainless Steel Swageless Cone Toggle Terminal come with a test certificate?▾
Which parts connect to the Stainless Steel Swageless Cone Toggle Terminal?▾
How should the Stainless Steel Swageless Cone Toggle Terminal be fitted and inspected?▾
How does the Stainless Steel Swageless Cone Toggle Terminal compare with the Stainless Steel Swage Toggle Terminal?▾
Do you ship the Stainless Steel Swageless Cone Toggle Terminal outside the UAE?▾
Do you hold the Stainless Steel Swageless Cone Toggle Terminal for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Spelter sockets: open vs closed, zinc vs resin, and when a wedge socket will do
A properly poured spelter socket keeps 100% of the wire rope’s breaking load — the only end fitting besides a swaged socket that does. Open sockets connect with a pin through their jaws; closed sockets take a pin or shackle through a solid eye. A wedge socket is quicker to fit but keeps 80%. Here is how to choose and what a good socket needs.
5 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








