Stainless Steel Twist Link Chain — 5/64–1/8″

Stainless Steel Twist Link Chain, in 3 sizes, 5/64″ to 1/8″. Not for overhead lifting. Not rated for lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Twist Link Chain
- Size range: 5/64″ to 1/8″
- Size range
- 5/64″ to 1/8″
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Stainless Steel Twist Link Chain for tension, lashing and fixing duty. Type 304 or type 316 stainless steel, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
3 sizes, 5/64″ to 1/8″. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
Choose stainless for corrosion resistance.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Twist Link Chain |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5/64″ to 1/8″ |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-SC-SSTLC-008
- Size
- 5/64″
- A (mm)
- 1.778
- B (mm)
- 7.62
- C (mm)
- 3.302
- Weight (kg)
- 0.07
- Indus part no.IH-LR-SC-SSTLC-332764
- Size
- 3/32-7/64″
- A (mm)
- 2.286
- B (mm)
- 7.874
- C (mm)
- 4.064
- Weight (kg)
- 0.09
- Indus part no.IH-LR-SC-SSTLC-012
- Size
- 1/8″
- A (mm)
- 2.794
- B (mm)
- 12.19
- C (mm)
- 5.08
- Weight (kg)
- 0.13
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Twist Link Chain and where is it used?▾
How do I read Stainless Steel Twist Link Chain part numbers such as IH-LR-SC-SSTLC-008?▾
Which sizes does the Stainless Steel Twist Link Chain come in?▾
How should I pick the size of Stainless Steel Twist Link Chain for my job?▾
What load rating does the Stainless Steel Twist Link Chain carry?▾
What is the Stainless Steel Twist Link Chain made from and how is it finished?▾
Does the Stainless Steel Twist Link Chain come with a test certificate?▾
Which parts connect to the Stainless Steel Twist Link Chain?▾
How do I install and check the Stainless Steel Twist Link Chain?▾
How does the Stainless Steel Twist Link Chain compare with the Stainless Steel DIN 763 Long Link Chain?▾
Do you ship the Stainless Steel Twist Link Chain outside the UAE?▾
Is the Stainless Steel Twist Link Chain available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Stainless steel lifting chain: Grade 60 ratings, where it is worth it, and its limits
Stainless steel chain lifts where galvanised alloy chain would rust or contaminate: food plants, water treatment, marine and offshore. It carries less than Grade 80 at the same size, and chlorides in warm air can crack it. Ratings from our Grade 60 table, where stainless is worth it, which stainless chain to avoid for lifting, and how to look after it.
3 min read
Lifting & rigging
Stainless vs galvanized rigging in Gulf coastal air: what lasts, and what carries less
On the Gulf coast, zinc on galvanized rigging can be lost at up to 8 µm a year, and faster offshore. Stainless steel does not rust away, but it pits in salt air, can crack in hot chloride conditions, and is usually rated well below carbon or alloy steel of the same size. Here is how to choose.
5 min read
Lifting & rigging
Hammerlocks, clevis fittings and connecting links: joining chain sling components
Every chain sling joins chain to a master link and a hook somewhere. A hammerlock-type connecting link does it with two halves and a pin; a clevis fitting takes the chain straight onto its pin; an eye fitting needs a link to join it. What each joint is, how they are rated, and the look-alike links that must never be used for lifting.
6 min read








