Stainless Steel Wide S Hook Asymmetric
Stainless Steel Wide S Hook Asymmetric, in 5 sizes, 3 mm to 8 mm. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Wide S Hook Asymmetric
- Size range: 3 mm to 8 mm
- Size range
- 3 mm to 8 mm
- Material
- Type 304 or type 316 stainless steel wide s hook
- Finish
- Polished
Product description
Stainless Steel Wide S Hook Asymmetric for tension, lashing and fixing duty. Type 304 or type 316 stainless steel wide s hook, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
5 sizes, 3 mm to 8 mm. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping / machining.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Wide S Hook Asymmetric |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 mm to 8 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel wide s hook |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
5 sizes| Indus part no. | Size | D1 (mm) | L (mm) | d (mm) | D2 (mm) | S1 (mm) | S2 (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-SN-WSHASS-3MM | 3 mm | 8 | 33 | 3 | 11 | 6 | 11 | 0.005 |
| IH-LR-SN-WSHASS-4MM | 4 mm | 10 | 46 | 4 | 18 | 6 | 12.5 | 0.01 |
| IH-LR-SN-WSHASS-5MM | 5 mm | 13.5 | 55 | 5 | 21 | 7 | 13 | 0.018 |
| IH-LR-SN-WSHASS-6MM | 6 mm | 15 | 64 | 6 | 25 | 8 | 16 | 0.03 |
| IH-LR-SN-WSHASS-8MM | 8 mm | 20 | 83 | 8 | 34 | 15.5 | 20 | 0.071 |
Size — Nominal size as the manufacturer states it. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. d — Dimension d on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel wide s hook asymmetric come in?▾
Can it be used for lifting?▾
Are snap hooks and quick links for overhead lifting?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Quick Link, 4× WLL Breaking Load — Zinc Plated
Quick Link — Zinc Plated
Wide Jaw Quick Link — Zinc Plated
Bit Snap with Wire Gate — Zinc Plated
Double End Bolt Snap Hook
Stainless Steel Delta Quick Link
Snap Hook with Eyelet — Zinc Plated
