Stainless Steel Swivel — D Type
Stainless Steel Swivel, in 4 sizes, 1 t to 4 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Swivel
- Size range: 1 t to 4 t
- Working load limit: 1 to 4 t
- Size range
- 1 t to 4 t
- Working load limit
- 1 to 4 t
- Material
- Stainless steel type 304 or 316 chain swivel
- Finish
- Polished / blue coated
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Stainless steel type 304 or 316 chain swivel, polished / blue coated.
Sizes and ratings
4 sizes, 1 t to 4 t. Working load limit 1 to 4 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Swivel |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1 t to 4 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1 to 4 t |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel type 304 or 316 chain swivel |
| Finish | Polished / blue coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | WLL 4:1 (t) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-RL-SSSD-1T | 1 t | 1 | 29 | 29 | 25 | 31 | 135 | 0.29 |
| IH-LR-RL-SSSD-1P6T | 1.6 t | 1.6 | 33 | 30 | 28 | 36 | 143 | 0.38 |
| IH-LR-RL-SSSD-2P6T | 2.6 t | 2.6 | 40 | 38 | 35 | 41 | 178 | 0.83 |
| IH-LR-RL-SSSD-4T | 4 t | 4 | 46 | 38 | 35 | 51 | 205 | 1.4 |
Size — Nominal size as the manufacturer states it. WLL 4:1 — Working load limit at a 4:1 design factor, as published. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel swivel come in?▾
What is the working load limit?▾
Can a swivel rotate under load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Triangle Delta Ring
Stainless Steel Welded D Ring
Stainless Steel Welded Ring
Twin Clevis Link
Weldless Alloy Master Link
Stainless Steel Welded Eye Wire Support with Tube Thimble
Weldless Forged Ring
