Steel Pulley Block — 7011 Series, 0.25–6 t WLL

Steel Pulley Block, in 54 sizes, 2″ to 12″, WLL 0.25 to 6 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Steel Pulley Block
- Size range: 2″ to 12″
- Working load limit: 0.25 to 6 t
- Size range
- 2″ to 12″
- Working load limit
- 0.25 to 6 t
- Material
- Mild steel
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull. Mild steel.
Sizes and ratings
54 sizes, 2″ to 12″. Working load limit 0.25 to 6 t. Available as: single sheave, eye, single sheave, hook, double sheave, eye, double sheave, hook, triple sheave, eye, triple sheave, hook. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Steel Pulley Block |
| Sizes | 54 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2″ to 12″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.25 to 6 t |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
54 sizes- Indus part no.IH-LR-BP-PB7011-200-SSE
- Size
- 2″
- Type
- Single sheave, eye
- Rope size
- 6 mm
- WLL (t)
- 0.25
- A (mm)
- 58
- B (mm)
- 32
- C (mm)
- 11
- L (mm)
- 217
- Ø (mm)
- 49
- Weight (kg)
- 0.55
- Indus part no.IH-LR-BP-PB7011-300-SSE
- Size
- 3″
- Type
- Single sheave, eye
- Rope size
- 8 mm
- WLL (t)
- 0.5
- A (mm)
- 81
- B (mm)
- 44.5
- C (mm)
- 13
- L (mm)
- 270.5
- Ø (mm)
- 70.5
- Weight (kg)
- 1.15
- Indus part no.IH-LR-BP-PB7011-400-SSE
- Size
- 4″
- Type
- Single sheave, eye
- Rope size
- 10 mm
- WLL (t)
- 1
- A (mm)
- 112
- B (mm)
- 51
- C (mm)
- 16
- L (mm)
- 304.5
- Ø (mm)
- 97
- Weight (kg)
- 2
- Indus part no.IH-LR-BP-PB7011-500-SSE
- Size
- 5″
- Type
- Single sheave, eye
- Rope size
- 13 mm
- WLL (t)
- 1.5
- A (mm)
- 140
- B (mm)
- 55
- C (mm)
- 17
- L (mm)
- 379
- Ø (mm)
- 125
- Weight (kg)
- 3.2
- Indus part no.IH-LR-BP-PB7011-600-SSE
- Size
- 6″
- Type
- Single sheave, eye
- Rope size
- 16 mm
- WLL (t)
- 2
- A (mm)
- 168
- B (mm)
- 75
- C (mm)
- 22
- L (mm)
- 415
- Ø (mm)
- 146
- Weight (kg)
- 4.6
- Indus part no.IH-LR-BP-PB7011-700-SSE
- Size
- 7″
- Type
- Single sheave, eye
- Rope size
- 19 mm
- WLL (t)
- 3
- A (mm)
- 186
- B (mm)
- 81.5
- C (mm)
- 25
- L (mm)
- 505
- Ø (mm)
- 173
- Weight (kg)
- 7.8
- Indus part no.IH-LR-BP-PB7011-800-SSE
- Size
- 8″
- Type
- Single sheave, eye
- Rope size
- 22 mm
- WLL (t)
- 4
- A (mm)
- 212
- B (mm)
- 81.5
- C (mm)
- 26
- L (mm)
- 512
- Ø (mm)
- 200
- Weight (kg)
- 10
- Indus part no.IH-LR-BP-PB7011-1000-SSE
- Size
- 10″
- Type
- Single sheave, eye
- Rope size
- 25 mm
- WLL (t)
- 5
- A (mm)
- 276
- B (mm)
- 85
- C (mm)
- 28
- L (mm)
- 611
- Ø (mm)
- 250
- Weight (kg)
- 15
Show all 54 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Steel Pulley Block — 7011 Series used for?▾
How do I read Steel Pulley Block — 7011 Series part numbers such as IH-LR-BP-PB7011-200-SSE?▾
What size range does the Steel Pulley Block — 7011 Series cover?▾
How do I choose the right size of Steel Pulley Block — 7011 Series?▾
What is the rated capacity of the Steel Pulley Block — 7011 Series?▾
What is the Steel Pulley Block — 7011 Series made from and how is it finished?▾
What standard and certificate apply to the Steel Pulley Block — 7011 Series?▾
What do I use with the Steel Pulley Block — 7011 Series?▾
How do I install and check the Steel Pulley Block — 7011 Series?▾
How does the Steel Pulley Block — 7011 Series compare with the Steel Pulley Block?▾
Can you export the Steel Pulley Block — 7011 Series from Dubai?▾
Do you hold the Steel Pulley Block — 7011 Series for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Typ 7011
- fr
- union à marteau type 7011
- es
- unión de martillo tipo 7011
- it
- giunto a martello tipo 7011
From the blog








