Stainless Steel Swivel Eye Bolt Snap — 3/8–1″

Stainless Steel Swivel Eye Bolt Snap, in 5 sizes, 3/8″ to 1″. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Swivel Eye Bolt Snap
- Size range: 3/8″ to 1″
- Size range
- 3/8″ to 1″
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Stainless Steel Swivel Eye Bolt Snap for tension, lashing and fixing duty. Type 304 or type 316 stainless steel, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
5 sizes, 3/8″ to 1″. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Precision cast.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Swivel Eye Bolt Snap |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/8″ to 1″ |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-LR-SN-SEBSSS-038
- Size
- 3/8″
- A (mm)
- 12
- C (mm)
- 9
- D (mm)
- 3
- E (mm)
- 7
- L (mm)
- 64
- Weight (kg)
- 0.025
- Indus part no.IH-LR-SN-SEBSSS-050
- Size
- 1/2″
- A (mm)
- 14
- C (mm)
- 9
- D (mm)
- 4
- E (mm)
- 7
- L (mm)
- 70
- Weight (kg)
- 0.025
- Indus part no.IH-LR-SN-SEBSSS-062
- Size
- 5/8″
- A (mm)
- 16.8
- C (mm)
- 11
- D (mm)
- 4.5
- E (mm)
- 9
- L (mm)
- 80
- Weight (kg)
- 0.039
- Indus part no.IH-LR-SN-SEBSSS-075
- Size
- 3/4″
- A (mm)
- 20
- C (mm)
- 12
- D (mm)
- 4.5
- E (mm)
- 11
- L (mm)
- 91
- Weight (kg)
- 0.049
- Indus part no.IH-LR-SN-SEBSSS-100
- Size
- 1″
- A (mm)
- 27
- C (mm)
- 14
- D (mm)
- 5.5
- E (mm)
- 13
- L (mm)
- 110
- Weight (kg)
- 0.074
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Swivel Eye Bolt Snap and what is it used for?▾
Which sizes of Stainless Steel Swivel Eye Bolt Snap are available?▾
How do I choose the right size of Stainless Steel Swivel Eye Bolt Snap?▾
What load rating does the Stainless Steel Swivel Eye Bolt Snap have?▾
What part number do I quote for the Stainless Steel Swivel Eye Bolt Snap?▾
When should I choose the Stainless Steel Swivel Eye Bolt Snap instead of the Stainless Steel Swivel Round Eye Bolt Snap Hook?▾
What material and finish does the Stainless Steel Swivel Eye Bolt Snap have?▾
What standard and certificate come with the Stainless Steel Swivel Eye Bolt Snap?▾
What can the Stainless Steel Swivel Eye Bolt Snap be connected to?▾
How should the Stainless Steel Swivel Eye Bolt Snap be inspected and used?▾
Where is the Stainless Steel Swivel Eye Bolt Snap typically used?▾
Can I buy the Stainless Steel Swivel Eye Bolt Snap from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








