Steel Cable Pulley Block — 150–200 lbs WLL

Steel Cable Pulley Block, in 2 sizes, 60 mm to 95 mm, WLL 150 to 200 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Steel Cable Pulley Block
- Size range: 60 mm to 95 mm
- Working load limit: 150 to 200 lbs
- Size range
- 60 mm to 95 mm
- Working load limit
- 150 to 200 lbs
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull.
Sizes and ratings
2 sizes, 60 mm to 95 mm. Working load limit 150 to 200 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Steel Cable Pulley Block |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 60 mm to 95 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 150 to 200 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-LR-BP-CPB-60MM
- Size
- 60 mm
- Rope size
- 30 mm
- WLL (lbs)
- 150
- Weight (kg)
- 0.8
- Indus part no.IH-LR-BP-CPB-95MM
- Size
- 95 mm
- Rope size
- 50 mm
- WLL (lbs)
- 200
- Weight (kg)
- 2.14
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Steel Cable Pulley Block and where is it used?▾
How do I read Steel Cable Pulley Block part numbers such as IH-LR-BP-CPB-60MM?▾
Which sizes does the Steel Cable Pulley Block come in?▾
How should I pick the size of Steel Cable Pulley Block for my job?▾
What is the rated capacity of the Steel Cable Pulley Block?▾
What is the Steel Cable Pulley Block made from and how is it finished?▾
What standard and certificate apply to the Steel Cable Pulley Block?▾
Which parts connect to the Steel Cable Pulley Block?▾
How do I install and check the Steel Cable Pulley Block?▾
How does the Steel Cable Pulley Block compare with the Steel Pulley Block?▾
Do you ship the Steel Cable Pulley Block outside the UAE?▾
Is the Steel Cable Pulley Block available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








