Stainless Steel Welded Eye Bolt with Nut and Washer — 250–875 kg WLL

Stainless Steel Welded Eye Bolt with Nut and Washer, in 19 sizes, WLL 250 to 875 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Welded Eye Bolt with Nut and Washer
- Working load limit: 250 to 875 kg
- Working load limit
- 250 to 875 kg
- Material
- Stainless steel 304 or 316 welded eye bolt
- Finish
- Polished and electric polished
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Stainless steel 304 or 316 welded eye bolt, polished and electric polished.
Sizes and ratings
19 sizes. Working load limit 250 to 875 kg. Minimum breaking load 1,000 to 3,500 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Welded Eye Bolt with Nut and Washer |
| Sizes | 19 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 250 to 875 kg |
| Minimum breaking load | 1,000 to 3,500 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 welded eye bolt |
| Finish | Polished and electric polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
19 sizes- Indus part no.IH-LR-EB-SSWEBNW-M6
- Size
- M6 (M6*60)
- WLL (kg)
- 250
- Min breaking load (kg)
- 1,000
- B (mm)
- 13
- C (mm)
- 35
- D (mm)
- 60
- Indus part no.IH-LR-EB-SSWEBNW-M6-2
- Size
- M6 (M6*80)
- WLL (kg)
- 250
- Min breaking load (kg)
- 1,000
- B (mm)
- 13
- C (mm)
- 35
- D (mm)
- 80
- Indus part no.IH-LR-EB-SSWEBNW-M6-3
- Size
- M6 (M6*90)
- WLL (kg)
- 250
- Min breaking load (kg)
- 1,000
- B (mm)
- 13
- C (mm)
- 35
- D (mm)
- 90
- Indus part no.IH-LR-EB-SSWEBNW-M6-4
- Size
- M6 (M6*100)
- WLL (kg)
- 250
- Min breaking load (kg)
- 1,000
- B (mm)
- 13
- C (mm)
- 35
- D (mm)
- 100
- Indus part no.IH-LR-EB-SSWEBNW-M8
- Size
- M8 (M8*60)
- WLL (kg)
- 450
- Min breaking load (kg)
- 1,800
- B (mm)
- 16
- C (mm)
- 45
- D (mm)
- 60
- Indus part no.IH-LR-EB-SSWEBNW-M8-2
- Size
- M8 (M8*80)
- WLL (kg)
- 450
- Min breaking load (kg)
- 1,800
- B (mm)
- 16
- C (mm)
- 45
- D (mm)
- 80
- Indus part no.IH-LR-EB-SSWEBNW-M8-3
- Size
- M8 (M8*100)
- WLL (kg)
- 450
- Min breaking load (kg)
- 1,800
- B (mm)
- 16
- C (mm)
- 45
- D (mm)
- 100
- Indus part no.IH-LR-EB-SSWEBNW-M8-4
- Size
- M8 (M8*110)
- WLL (kg)
- 450
- Min breaking load (kg)
- 1,800
- B (mm)
- 16
- C (mm)
- 45
- D (mm)
- 110
Show all 19 sizesShow fewer sizes
- Indus part no.IH-LR-EB-SSWEBNW-M8-5
- Size
- M8 (M8*130)
- WLL (kg)
- 450
- Min breaking load (kg)
- 1,800
- B (mm)
- 16
- C (mm)
- 45
- D (mm)
- 130
- Indus part no.IH-LR-EB-SSWEBNW-M10
- Size
- M10 (M10*80)
- WLL (kg)
- 600
- Min breaking load (kg)
- 2,400
- B (mm)
- 23
- C (mm)
- 50
- D (mm)
- 80
- Indus part no.IH-LR-EB-SSWEBNW-M10-2
- Size
- M10 (M10*100)
- WLL (kg)
- 600
- Min breaking load (kg)
- 2,400
- B (mm)
- 23
- C (mm)
- 50
- D (mm)
- 100
- Indus part no.IH-LR-EB-SSWEBNW-M10-3
- Size
- M10 (M10*130)
- WLL (kg)
- 600
- Min breaking load (kg)
- 2,400
- B (mm)
- 23
- C (mm)
- 50
- D (mm)
- 130
- Indus part no.IH-LR-EB-SSWEBNW-M10-4
- Size
- M10 (M10*150)
- WLL (kg)
- 600
- Min breaking load (kg)
- 2,400
- B (mm)
- 23
- C (mm)
- 50
- D (mm)
- 150
- Indus part no.IH-LR-EB-SSWEBNW-M10-5
- Size
- M10 (M10*200)
- WLL (kg)
- 600
- Min breaking load (kg)
- 2,400
- B (mm)
- 23
- C (mm)
- 50
- D (mm)
- 200
- Indus part no.IH-LR-EB-SSWEBNW-M12
- Size
- M12 (M12*100)
- WLL (kg)
- 875
- Min breaking load (kg)
- 3,500
- B (mm)
- 25
- C (mm)
- 60
- D (mm)
- 100
- Indus part no.IH-LR-EB-SSWEBNW-M12-2
- Size
- M12 (M12*150)
- WLL (kg)
- 875
- Min breaking load (kg)
- 3,500
- B (mm)
- 25
- C (mm)
- 60
- D (mm)
- 150
- Indus part no.IH-LR-EB-SSWEBNW-M12-3
- Size
- M12 (M12*165)
- WLL (kg)
- 875
- Min breaking load (kg)
- 3,500
- B (mm)
- 25
- C (mm)
- 60
- D (mm)
- 165
- Indus part no.IH-LR-EB-SSWEBNW-M12-4
- Size
- M12 (M12*185)
- WLL (kg)
- 875
- Min breaking load (kg)
- 3,500
- B (mm)
- 25
- C (mm)
- 60
- D (mm)
- 185
- Indus part no.IH-LR-EB-SSWEBNW-M12-5
- Size
- M12 (M12*200)
- WLL (kg)
- 875
- Min breaking load (kg)
- 3,500
- B (mm)
- 25
- C (mm)
- 60
- D (mm)
- 200
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Welded Eye Bolt with Nut and Washer and what is it used for?▾
How are the Indus part numbers for the Stainless Steel Welded Eye Bolt with Nut and Washer structured?▾
What sizes does the Stainless Steel Welded Eye Bolt with Nut and Washer come in?▾
How do I choose the right size of Stainless Steel Welded Eye Bolt with Nut and Washer?▾
What is the working load limit of the Stainless Steel Welded Eye Bolt with Nut and Washer?▾
What is the Stainless Steel Welded Eye Bolt with Nut and Washer made from?▾
Does the Stainless Steel Welded Eye Bolt with Nut and Washer come with a test certificate?▾
What should the Stainless Steel Welded Eye Bolt with Nut and Washer be used with?▾
How should the Stainless Steel Welded Eye Bolt with Nut and Washer be inspected and used safely?▾
Where is the Stainless Steel Welded Eye Bolt with Nut and Washer typically used?▾
How does the Stainless Steel Welded Eye Bolt with Nut and Washer differ from the Stainless Steel Long Shank Eye Bolt with Nut and Washer?▾
Do you stock the Stainless Steel Welded Eye Bolt with Nut and Washer in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Eye bolt types and angled loads: plain, shoulder and DIN 580 collar eye bolts
A plain eye bolt is rated for a straight pull only. A shoulder eye bolt pulled at 45° keeps 30% of its rating. A DIN 580 collar eye bolt has its own table for angled loads and none at all for a pull across the eye. Here is how each type is rated, fitted and derated.
8 min read
Rigging capacity charts
Eye bolt capacity chart: DIN 580, BS 4278, JIS and US eye bolts by thread size
Eye bolt working load limits by thread: DIN 580 and DIN 582 from M8 to M100 with angled ratings, BS 4278 and JIS B 1168 collar eye bolts, US shoulder and machinery eye bolts at 0°, 15°, 30°, 45° and 90°, and eye nuts — with the fitting rules every rating assumes.
7 min read
Lifting & rigging
Lifting points compared: weld-on pad eyes, bolt-on and swivel lifting points, and eye bolts
A weld-on lifting point is only as good as its weld. A bolt-on point is only as good as its thread engagement and torque. A swivel point turns to face the sling, but not every one keeps its full rating sideways. Here is how the four kinds of lifting point compare, and what each needs to be fitted properly.
6 min read








