Stainless Steel Swage Toggle Terminal — 3–10 mm

Stainless Steel Swage Toggle Terminal (European type), in 6 sizes, 3 mm to 10 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Swage Toggle Terminal
- Pattern / standard: European type
- Size range: 3 mm to 10 mm
- Size range
- 3 mm to 10 mm
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Spelter sockets and swage or swageless terminals that end a wire rope in an eye, jaw, fork or stud. Built to the European pattern. Type 304 or type 316 stainless steel, polished.
Sizes and ratings
6 sizes, 3 mm to 10 mm. Minimum breaking load 1,300 to 9,800 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping / machining.
Choosing a size
Match the terminal to the rope diameter and construction, and fit it with the method it is made for — poured, pressed or hand-assembled.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Swage Toggle Terminal |
| Pattern / standard | European type |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 mm to 10 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 1,300 to 9,800 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-ST-SSSTT-3MM
- Size
- 3 mm
- Rope size
- 3 mm
- Min breaking load (kg)
- 1,300
- A (mm)
- 7
- D (mm)
- 6
- D1 (mm)
- 3.3
- H (mm)
- 15
- L (mm)
- 75
- L1 (mm)
- 38
- D2 (mm)
- 6.35
- Weight (kg/100 pcs)
- 3.5
- Indus part no.IH-LR-ST-SSSTT-4MM
- Size
- 4 mm
- Rope size
- 4 mm
- Min breaking load (kg)
- 2,350
- A (mm)
- 10
- D (mm)
- 8
- D1 (mm)
- 4.3
- H (mm)
- 20
- L (mm)
- 89
- L1 (mm)
- 45
- D2 (mm)
- 7.5
- Weight (kg/100 pcs)
- 6.5
- Indus part no.IH-LR-ST-SSSTT-5MM
- Size
- 5 mm
- Rope size
- 5 mm
- Min breaking load (kg)
- 3,500
- A (mm)
- 12
- D (mm)
- 9
- D1 (mm)
- 5.3
- H (mm)
- 25
- L (mm)
- 104
- L1 (mm)
- 51
- D2 (mm)
- 9
- Weight (kg/100 pcs)
- 11.8
- Indus part no.IH-LR-ST-SSSTT-6MM
- Size
- 6 mm
- Rope size
- 6 mm
- Min breaking load (kg)
- 4,100
- A (mm)
- 13
- D (mm)
- 12
- D1 (mm)
- 6.4
- H (mm)
- 30
- L (mm)
- 127
- L1 (mm)
- 64
- D2 (mm)
- 12.6
- Weight (kg/100 pcs)
- 27
- Indus part no.IH-LR-ST-SSSTT-8MM
- Size
- 8 mm
- Rope size
- 8 mm
- Min breaking load (kg)
- 6,200
- A (mm)
- 17
- D (mm)
- 16
- D1 (mm)
- 8.4
- H (mm)
- 40
- L (mm)
- 163
- L1 (mm)
- 76
- D2 (mm)
- 16
- Weight (kg/100 pcs)
- 37.5
- Indus part no.IH-LR-ST-SSSTT-10MM
- Size
- 10 mm
- Rope size
- 10 mm
- Min breaking load (kg)
- 9,800
- A (mm)
- 20
- D (mm)
- 19
- D1 (mm)
- 10.5
- H (mm)
- 45
- L (mm)
- 184
- L1 (mm)
- 89
- D2 (mm)
- 18
- Weight (kg/100 pcs)
- 64.5
Size — Nominal size as the manufacturer states it. Rope size — Rope diameter the sheave is made for. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Stainless Steel Swage Toggle Terminal used for?▾
How do I read Stainless Steel Swage Toggle Terminal part numbers such as IH-LR-ST-SSSTT-3MM?▾
Which sizes does the Stainless Steel Swage Toggle Terminal come in?▾
How should I pick the size of Stainless Steel Swage Toggle Terminal for my job?▾
What is the rated capacity of the Stainless Steel Swage Toggle Terminal?▾
What is the Stainless Steel Swage Toggle Terminal made from and how is it finished?▾
Does the Stainless Steel Swage Toggle Terminal come with a test certificate?▾
What do I use with the Stainless Steel Swage Toggle Terminal?▾
How should the Stainless Steel Swage Toggle Terminal be fitted and inspected?▾
How does the Stainless Steel Swage Toggle Terminal compare with the Stainless Steel Swage Eye Terminal?▾
Can you export the Stainless Steel Swage Toggle Terminal from Dubai?▾
Do you hold the Stainless Steel Swage Toggle Terminal for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Spelter sockets: open vs closed, zinc vs resin, and when a wedge socket will do
A properly poured spelter socket keeps 100% of the wire rope’s breaking load — the only end fitting besides a swaged socket that does. Open sockets connect with a pin through their jaws; closed sockets take a pin or shackle through a solid eye. A wedge socket is quicker to fit but keeps 80%. Here is how to choose and what a good socket needs.
5 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








