Stainless Steel Wire Rope 6x7+IWS
Stainless Steel Wire Rope 6x7+IWS, in 21 sizes, 0.45 mm to 8 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Wire Rope 6x7+IWS
- Size range: 0.45 mm to 8 mm
- Size range
- 0.45 mm to 8 mm
- Material
- Stainless steel
- Finish
- Polished
Product description
Steel wire rope for cranes, winches, slings and guying. Stainless steel, polished.
Sizes and ratings
21 sizes, 0.45 mm to 8 mm. Minimum breaking load 0.142 to 40.6 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on construction, core and grade: more wires per strand bend more easily over a sheave, a steel core resists crushing, and a higher grade carries more for the same diameter. Work from the minimum breaking load and your design factor.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Wire Rope 6x7+IWS |
| Sizes | 21 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.45 mm to 8 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 0.142 to 40.6 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
21 sizes| Indus part no. | Size | Min breaking load (kN) | Weight (kg/100 m) |
|---|---|---|---|
| IH-LR-WR-SSWR6X7IW-0P45MM | 0.45 mm | 0.142 | 0.08 |
| IH-LR-WR-SSWR6X7IW-0P5MM | 0.5 mm | 0.176 | 0.12 |
| IH-LR-WR-SSWR6X7IW-0P6MM | 0.6 mm | 0.253 | 0.15 |
| IH-LR-WR-SSWR6X7IW-0P7MM | 0.7 mm | 0.345 | 0.2 |
| IH-LR-WR-SSWR6X7IW-0P8MM | 0.8 mm | 0.461 | 0.26 |
| IH-LR-WR-SSWR6X7IW-0P9MM | 0.9 mm | 0.539 | 0.32 |
| IH-LR-WR-SSWR6X7IW-1MM | 1 mm | 0.637 | 0.4 |
| IH-LR-WR-SSWR6X7IW-1P2MM | 1.2 mm | 1.2 | 0.65 |
| IH-LR-WR-SSWR6X7IW-1P5MM | 1.5 mm | 1.67 | 0.93 |
| IH-LR-WR-SSWR6X7IW-1P6MM | 1.6 mm | 2.15 | 1.2 |
| IH-LR-WR-SSWR6X7IW-1P8MM | 1.8 mm | — | 1.35 |
| IH-LR-WR-SSWR6X7IW-2MM | 2 mm | 2.94 | 1.65 |
| IH-LR-WR-SSWR6X7IW-2P4MM | 2.4 mm | 4.1 | 2.4 |
| IH-LR-WR-SSWR6X7IW-3MM | 3 mm | 6.37 | 3.7 |
| IH-LR-WR-SSWR6X7IW-3P2MM | 3.2 mm | 7.15 | 4.2 |
| IH-LR-WR-SSWR6X7IW-3P5MM | 3.5 mm | 7.64 | 5.1 |
| IH-LR-WR-SSWR6X7IW-4MM | 4 mm | 9.51 | 6.5 |
| IH-LR-WR-SSWR6X7IW-4P5MM | 4.5 mm | 12.1 | 8.3 |
| IH-LR-WR-SSWR6X7IW-5MM | 5 mm | 14.7 | 10.5 |
| IH-LR-WR-SSWR6X7IW-6MM | 6 mm | 18.6 | 15.1 |
| IH-LR-WR-SSWR6X7IW-8MM | 8 mm | 40.6 | 26.6 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Weight — Weight per 100 metres, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel wire rope 6x7+IWS come in?▾
Which grade should I order — 1770 or 1960?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Wire Strand — 1x7 and 1x19
1x19 Galvanized Aircraft Cable
1x37 Steel Wire Strand, Galvanized
6x12+7FC Steel Wire Rope
6x19 Steel Wire Rope
6x19+IWS Galvanized Steel Wire Rope
