Stainless Steel Wire Rope Clip — DIN 741
Stainless Steel Wire Rope Clip (DIN 741), in 16 sizes, 3 mm to 40 mm. Indus part numbers.
Key features
- Product type: Stainless Steel Wire Rope Clip
- Pattern / standard: DIN 741
- Size range: 3 mm to 40 mm
- Size range
- 3 mm to 40 mm
- Material
- Stainless steel 304 or 316
- Finish
- Polished
Product description
Wire rope clips form an eye or join two ropes without a swaging press. Made to DIN 741. Stainless steel 304 or 316, polished.
Sizes
16 sizes, 3 mm to 40 mm. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Cast.
Choosing a size
Drop-forged clips are the ones used on lifting terminations; malleable clips are for guy lines and non-lifting duty. Fit the saddle on the live end, use the number of clips the maker specifies for the rope size, and re-torque after the first load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Wire Rope Clip |
| Pattern / standard | DIN 741 |
| Sizes | 16 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 mm to 40 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
16 sizes| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-WC-SSWRCD741-3MM | 3 mm | 9 | 10 | 12 | 4 | 10 | 21 | 16 |
| IH-LR-WC-SSWRCD741-5MM | 5 mm | 11 | 11 | 13 | 5 | 10 | 23 | 19 |
| IH-LR-WC-SSWRCD741-6MM | 6 mm | 13 | 12 | 15 | 5 | 11 | 26 | 23 |
| IH-LR-WC-SSWRCD741-8MM | 8 mm | 16 | 14 | 19 | 6 | 15 | 30 | 28 |
| IH-LR-WC-SSWRCD741-10MM | 10 mm | 19 | 18 | 22 | 8 | 17 | 34 | 34 |
| IH-LR-WC-SSWRCD741-11MM | 11 mm | 20 | 19 | 22 | 8 | 18 | 36 | 36 |
| IH-LR-WC-SSWRCD741-13MM | 13 mm | 24 | 23 | 30 | 10 | 21 | 42 | 45 |
| IH-LR-WC-SSWRCD741-14MM | 14 mm | 25 | 23 | 30 | 10 | 22 | 44 | 47 |
| IH-LR-WC-SSWRCD741-16MM | 16 mm | 29 | 26 | 33 | 12 | 26 | 50 | 51 |
| IH-LR-WC-SSWRCD741-19MM | 19 mm | 32 | 29 | 38 | 12 | 30 | 54 | 63 |
| IH-LR-WC-SSWRCD741-22MM | 22 mm | 37 | 33 | 44 | 14 | 34 | 61 | 71 |
| IH-LR-WC-SSWRCD741-26MM | 26 mm | 41 | 35 | 45 | 14 | 37 | 65 | 81 |
| IH-LR-WC-SSWRCD741-30MM | 30 mm | 50 | 40 | 50 | 16 | 50 | 80 | 94 |
| IH-LR-WC-SSWRCD741-32MM | 32 mm | 50 | 40 | 50 | 16 | 50 | 80 | 102 |
| IH-LR-WC-SSWRCD741-34MM | 34 mm | 54 | 45 | 55 | 16 | 55 | 88 | 104 |
| IH-LR-WC-SSWRCD741-40MM | 40 mm | 60 | 48 | 60 | 16 | 60 | 95 | 124 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel wire rope clip come in?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlauchschelle
- fr
- collier de serrage
- es
- abrazadera de manguera
- it
- fascetta stringitubo
Engineers viewing this also looked at
Stainless Steel Wire Rope Clip — JIS Type
Simplex Wire Rope Clip, Zinc Plated
Wire Rope Clip, Type A — Yellow Chromated
Malleable Wire Rope Clip, Type B — Zinc Plated
Wire Rope and Cable Grip 0.5Ton 1Ton 2Ton 3Ton
Wire Rope Grip — AS 2076
American Wire Rope Cable Grip
