Stainless Steel Swing Eye Bolt — DIN 444
Stainless Steel Swing Eye Bolt (DIN 444), in 17 sizes. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Swing Eye Bolt
- Pattern / standard: DIN 444
- Material
- Stainless steel type 304/316
- Finish
- Polished
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Made to DIN 444. Stainless steel type 304/316, polished.
Sizes
17 sizes. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged and full machining.
Choosing a size
Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Swing Eye Bolt |
| Pattern / standard | DIN 444 |
| Sizes | 17 |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel type 304/316 |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
17 sizes| Indus part no. | Size | Pitch (mm) | M (mm) | b (mm) | d1 (mm) | dk (mm) | s (mm) |
|---|---|---|---|---|---|---|---|
| IH-LR-EB-SSSEBD444-M5 | M5 | 0.8 | 5 | 16 | 5.03 | 12 | 8 |
| IH-LR-EB-SSSEBD444-M6 | M6 | 1 | 6 | 18 | 6.03 | 14 | 9 |
| IH-LR-EB-SSSEBD444-M8 | M8 | 1.25 | 8 | 22 | 8.036 | 18 | 11 |
| IH-LR-EB-SSSEBD444-M10 | M10 | 1.5 | 10 | 26 | 10.04 | 20 | 14 |
| IH-LR-EB-SSSEBD444-M12 | M12 | 1.75 | 12 | 30 | 12.04 | 25 | 17 |
| IH-LR-EB-SSSEBD444-M16 | M16 | 2 | 16 | 38 | 16.04 | 32 | 19 |
| IH-LR-EB-SSSEBD444-M20 | M20 | 2.5 | 18 | 46 | 18.04 | 40 | 24 |
| IH-LR-EB-SSSEBD444-M24 | M24 | 3 | 22 | 54 | 22.05 | 45 | 28 |
| IH-LR-EB-SSSEBD444-M27 | M27 | 3 | 24 | 60 | 24.05 | 50 | 30 |
| IH-LR-EB-SSSEBD444-M27-2 | M27 | 3 | 25 | 60 | 25.05 | 50 | 30 |
| IH-LR-EB-SSSEBD444-M30 | M30 | 3.5 | 27 | 66 | 27.05 | 55 | 34 |
| IH-LR-EB-SSSEBD444-M30-2 | M30 | 3.5 | 28 | 66 | 28.05 | 55 | 34 |
| IH-LR-EB-SSSEBD444-X | (M33) | 3.5 | 30 | — | 30.05 | 60 | 38 |
| IH-LR-EB-SSSEBD444-M36 | M36 | 4 | 32 | — | 32.06 | 65 | 41 |
| IH-LR-EB-SSSEBD444-M36-2 | M36 | 4 | 33 | — | 33.06 | 65 | 41 |
| IH-LR-EB-SSSEBD444-X-2 | (M39) | 4 | 35 | — | 35.06 | 70 | 46 |
| IH-LR-EB-SSSEBD444-X-3 | (M39) | 4 | 36 | — | 36.06 | 70 | 46 |
Size — Nominal size as the manufacturer states it. Pitch — Thread pitch or link pitch, as the source heads it. M — Dimension M on the manufacturer dimension drawing. b — Dimension b on the manufacturer dimension drawing. d1 — Dimension d1 on the manufacturer dimension drawing. dk — Dimension dk on the manufacturer dimension drawing. s — Dimension s on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel swing eye bolt come in?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Shoulder Eye Bolt with Nut and Washer — UNC Thread
Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern
Stainless Steel Swing Ring Nut
Stainless Steel Shoulder Nut Eye Bolt — US Type
Stainless Steel Welded Eye Bolt with Nut and Washer
Unwelded Eye Bolt, Wire Turned
Welded Eye Bolt, Wire Turned, with Lock Nut
