Stainless Steel Round Pad Eye with 4 Holes
Stainless Steel Round Pad Eye with 4 Holes, in 1 size, 9*90. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Round Pad Eye with 4 Holes
- Size range: 9*90
- Size range
- 9*90
- Material
- Type 304 or 316 stainless steel
- Finish
- Polished
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Type 304 or 316 stainless steel, polished.
Sizes
1 size, 9*90. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping / machining / welding.
Choosing a size
Rate the point for the load and the direction of pull. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Round Pad Eye with 4 Holes |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 9*90 |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| IH-LR-LP-SSRPE4H-990 | 9*90 | 90 | 51 | 24 | 9 | 8.5 | 39.5 | 3 | 0.172 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel round pad eye with 4 holes come in?▾
Can I lift at an angle from an eye bolt?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Round Pad Eye Plate with Ring
Stainless Steel Square Eye Plate
Stainless Steel Square Swivel Pad Eye
Stainless Steel Wire Eye Strap
Weld-On D Ring with Mounting Clip
Grade 80 Eye Bolt — DIN 580
Grade 80 Forged D Ring
